Retirement Projects
Replies
-
Some of those tools remind me *so much* of the ones in my (carpenter) dad's workshop. How fun to see!
His were auctioned - his own plan and action after he became blind in an accident and could no longer use them - so I have only a few hand tools.
I'm sure Rev. Olsen is smiling down on your shop. I don't see how these things could be in better hands.
That’s a tragic story about your dad. I’m very careful with PPE. I can’t imagine loosing my sight or mobility.
0 -
Some of those tools remind me *so much* of the ones in my (carpenter) dad's workshop. How fun to see!
His were auctioned - his own plan and action after he became blind in an accident and could no longer use them - so I have only a few hand tools.
I'm sure Rev. Olsen is smiling down on your shop. I don't see how these things could be in better hands.
That’s a tragic story about your dad. I’m very careful with PPE. I can’t imagine loosing my sight or mobility.
It wasn't a power tool accident. It was a "changing a fluorescent tube" accident, at age 83. That's even scarier, I think?
He was standing on his workbench in his pole barn, holding onto a post, trying to change the bulb with the other hand, couldn't quite get it, used both hands, fell off the bench and sustained various broken bones, including rendering his one good eye sightless. Went from living alone and fully independent to . . . not, in an instant. (Blindness, he had told me before that, was the thing he most feared happening to him.)
When I got to the hospital, he was cracking jokes at the ER docs, before they checked him into a bed in intensive care. Tough ol' dude, and a heckuva good role model throughout life. Not a thing wrong with him cognitively, to the moment of death, and he charted his own course before and after the accident. Lived on for several more years, making the best of it.2 -
Ann, he sounds like a man I’d like to have known. A tough rare breed these days.
3 -
That lady who looks after me got me a shop apron from Lee Valley for Christmas. It’s great. All the gear I’m using constantly is right there, and it really makes a difference in being able to wear normal clothes without changing at the top of the stairs.
3 -
One of the drink coasters took an accidental trip through the dishwasher, which pretty much destroyed it. I tried my hand at producing some out of maple and coloured mica tinted epoxy.
3 -
I’ve been busy in the workshop in between all night limo driving. Don’t know what day it is most of the time. 3 to 5 hour sleeps where I can get them.
Anyway, I made my wife a display rack for her classroom a year of so ago. One of her teacher friends likes it a lot, so I was commissioned to build another. I can’t charge her friend, so if she insists, I’ll just accept material costs. Waiting to hear how she wants it finished or if she wants to do that herself.
I also built a nice crosscut table for the 50’s saw.
4 -
Today I finished a larger table for my big bandsaw with a fence attachment, got first coat of stain on the bookrack, and started two three-section drying racks for my daughter and D-I-L.
2 -
Had my young apprentice helping this morning, my oldest grandson, Tucker. I always called him 'little buddy'. that doesn't fit anymore.
3 -
Clothes racks completed today, and last top-coat of spar urethane on the book display unit. Once the racks are dry, I'll put stick-on felt feet and off to all the ladies these go.
3 -
I liked the kayak building magazines better
1 -
Felt footies added, final sanding with fine steel wool and they're off to good homes.
3 -
My son and I put this YouTube video together yesterday.
Corn Fueled Blacksmith's Coal Forge
We have another one in editing about making my brake rotor blacksmith forge.3 -
I considered a fancier joint, but made them the same as the picture my daughter sent asking if I could make them. All dimensions pulled out of thin air, no plans. Plus, these joints gave me a chance to use my Freud dada set on the new to me refurbished 1950’s saw.
3 -
Finaly bought a new (to me) daily driver. Not quite what I was looking for but as close as I could get for reasonable money.
What I wanted; 6 cylinder, manual, 4x4, extended cab, in a bright blue.
(This one is a 4 cylinder, automatic)
What I got.
2014 Toyota Tacoma TRD Off-Road, 86k miles. Obviously black and also an automatic.
Manual transmission are nearly impossible to find these days.
5 -
I hope you enjoy the new Taco!
I took maybe four or five years to find mine. I just couldn't find the RIGHT Toyota truck to replace a 20-year old 1977 Celica GT that I was the third owner. I finally found one on a dealer lot that was ~almost~ what I wanted. Right next to it was a brand new truck for only $1000 more. I never in my life thought I would buy a new vehicle, but I drove away with a brand new truck. That was 21 years ago. I've only got 215,000 on the clock, so it's surely got another five years on it or so. The only two times I don't like the manual transmission is when dealing with heavy slow traffic and pulling a trailer up from a steep boat ramp. Fortunately, 4-low makes that a little less scary. I really don't want to stall and drop the rig into the river....
Would I like a more modern radio? Sure. Who uses cassette tapes anymore? Do I want power windows and locks? Well, not even that much, but it would be nice. Do I want a seat belt that actually retracts? Well, no because I replaced the original as the belt was getting frayed. The paint job is looking blue, as Neil would say. But it's a great little truck.
The one thing I do think would be really nice is two extra seats and doors, but that reduces space in the cargo bed.
1 -
Although I normally seek out used vehicles, back in 2011 I bought a brand-new 2011 Tundra and added a cap. It's been a great truck!! Decent gas mileage for a V8 4x4 full sized vehicle.
I took the picture from a distance to put into perspective the amount of snow pushed off of our parking lot at work.
2 -
Quick project to increase the functionality of my fire locker. Got a place to keep change, dry socks etc.
The Chief has commissioned me to make a lot more, for whoever opts in. Made out of some leftover plywood, fits in existing space.
5 -
...
... I never in my life thought I would buy a new vehicle, but I drove away with a brand new truck. That was 21 years ago. I've only got 215,000 on the clock, so it's surely got another five years on it or so.
...
My previous daily driver was a '94 Toyota truck (what became the Tacoma) that I bought new (my first new new vehicle) in early '95. It was also not quite what I was looking for as it was a dark blue rather than my preferred bright blue. Had 1 mile on the odometer. Retired late last year with a blown head gasket or cracked head, not sure which. It was a compromise between a farm truck and a daily commuter. 4 cylinder, manual, 4x4. Just ticked over 300K. The family named my old blue truck "Mouse" in honor of the 4 cylinder, a mouse on an exercise wheel for an engine was the inspiration.
Not a great shot of Mouse, but you should get the idea.
I'm gonna put a good used engine in it and retire it as a driver. It will become my full time farm truck. Save some wear and tear on "Darth Vader" (what the family is calling my black taco for some reason).
1 -
A bird’s eye maple dish for my modified fire dept locker to hold change and car keys.
4 -
Nice truck David. It looks like the old one served you well. I think I’ll be retiring the GTI this year and buying either a Toyota or Nissan truck. Second hand, too old for new vehicles unless I lease.2
-
d_thomas02 wrote: »Manual transmission are nearly impossible to find these days.
Heard that. I have missed twice in recent years - once on a RAV4 and once on an Escape. Found a manual version of each, but was the second (otherwise known as late) buyer each time.
Settled for an automatic version of each at different times. Good vehicles, even with the slushbox.
2 -
My wife went to a baby shower today for our niece (it'll be her second kid) and sent me this photo of something that I made for our niece's wedding way before I got into blacksmithing.
I cut the rings and small branch (used for the spacers between the rings) from an oak tree on my father-in-law's property. I cut over a dozen 1 inch thick rings with a chainsaw freehand (hardest part). Dried, fixed the inevitably checks, flattened, sanded, and applied the clear poly. Selected the best four for the final product. It can be disassembled for storage.
My wife says that she uses it all the time.
4 -
That is very cool, and it's great to see something you've built and gifted in use.1
-
Purpleheart stand finished with Tung oil for my vintage Gurkha Kukri.
4 -
That looks amazing, Kirk!0
-
Thanks Wayne. I expect it will end up in my basement office, out of reach of the grandkids.1
-
Both are beautiful!
My understanding is that purpleheart dust is an irritant and a sensitizer.
Kirk, I'm sure you know this. I'm throwing this out for others. This is not a wood for beginners.
By the by, is it bad that with my current hobby I focused on the blade first? Is there a story behind it?2
