Form critique thread, post your videos here.
Options
Replies
-
Are your wrists flexed at all during the pull?
Do you mean is my grip too far round so my wrist is coming from the back of the bar rather than above it?
If your wrist isn't bent on the grip, your knuckles shouldn't be protruding out on the underhand grip. How you might do that with a full grip i have no clue, the only time that happens to me is when the bar starts to slip and I'm holding it with my fingers (looking at it now I should've said wrist arch not flex), but pulling sumo my understanding is you should get contact at about the forearms. Assuming that and assuming n 'bump' out at the hand, I guess I don't see how you're getting nudged. Is it something you think you can work through? Sorry I can't help more i just have never really seen that.
I *think* my knuckles are under the bar (just). I am probably explaining this really badly. When I pull, my forrarms are against my inner/front thighs - and then as I raise up, the back of my hand/wrist hits me there - but it could be my knuckles. I will pay more attention to the placement of my hand and the issue next time I do deads to see if I can identify and explain better. I will possibly try to take a video as my grip may be off. Thank you for bearing with me on my garbled explanation.
So I fixed my 'problem' - I was not dragging the bar up my legs on the upper part which messed with my grip - also I was not quite balanced with my grip between where my right and left hand was.0 -
So I fixed my 'problem' - I was not dragging the bar up my legs on the upper part which messed with my grip - also I was not quite balanced with my grip between where my right and left hand was.
nice0 -
On top of the stuff Rock and Taso said.
Squat:
That sticking point where you slow way down, do you have that at lighter weights? Looks like your having trouble transitioning the primary movement muscles.
I'd suggest, on top of your normal workout, taking some weight off the bar (drop at least 20 lbs) and banging out a couple sets where you really focus on BLASTING through the weight. Focus on driving through the sticking point and see how that improves your top weight sets.
Deadlift:
First video your stance is too wide, bring it in and bring in your arm width (I explain why a couple posts up)
The second video shows that you're not using as much hip drive as you can (and in the first video you can kind of see it, where it looks like the bar comes up before your hips come forward). Focus on driving your hips forward early, hard, and fast. That's what brings the bar up, not pulling it up.
OHP:
Muscle imbalance, I'd suggest either adding in DB overhead pressing or alternating it in.
Also try a thumbless grip, should allow you to move more weight.
Finally (and this is kind of minor) get all the way under the bar when you unrack it. If you're not going to clean the bar into position, there's no sense burning energy holding the bar out in front of you while you get into position, it can also throw you off balance and cause injury.
Bench:
The bar should be touching your body (where on your chest will depend on your setup) on each rep, don't cheat yourself by not bringing it down all the way (I couldn't tell for sure if you did that, but a couple reps looked like it)
Now here's where my powerlifting side comes in. So bear that in mind with all of this as what you're doing now isn't wrong, it's just (in my opinion) not as efficient.
You need a more solid base. Before the descent your shoulder blades should be squeezed back HARD. imagine trying to make them into a table for you to lay on, draw them back and hold it.
I like to setup with my head off the top of the bench, then grab the bar and push myself down into position. That's how I'm able to get my feet flat on the ground at the same level as my low back. I basically make an M with my body. That allows me to push with me legs on the press and add some leg drive to the lift, it also gives me a mechanical advantage because the arch shortens the range of motion and makes the lift more decline bench press-like.
A little dinking around yeilded:
http://www.youtube.com/watch?annotation_id=annotation_903551&feature=iv&src_vid=_sIXy0gkkrQ&v=vUcjOIZc80c
(start at about 1:00, not my favorite video but I'm tired so it's the best I could find.)
If you're benching right, it should be one of the more uncomfortable lifts you do.
Thanks!!!!!!! I don't have the sticking point at lower weights. Lots to work on
I really appreciate it you all. 0 -
Thanks!!!!!!! I don't have the sticking point at lower weights. Lots to work on I really appreciate it you all.
If you don't see the sticking points at lower levels it's a musculature thing and not a form thing (which is good).
Try adding in some targeted glute, hamstring, and quad work. The one that's the weakest is likely what you need to build up (I suspect it's not the quads).0 -
Hey Guys,
Two new form check videos for you to critique!
First, BB Rows (not Pendlay b/c I am too lazy to set up for them). Set #5 of 5x6.
http://www.youtube.com/watch?v=7VImqLO6b04&feature=youtu.be
Second, Squat to Box. I realize that the box probably doesn't get me quite to depth, but I have a major issue with buttwinking, or low back rounding as I get close to depth. I am working on squatting to box without rounding and then will continue to work on depth. I suspect its a hip flexibility thing. This was set #4 of 5x6. Weights are about 60% of ORM, as I just deloaded to work on form and am moving my way back up.
http://www.youtube.com/watch?v=6z1KMfX_BMw&feature=youtu.be
Thanks in advance!0 -
Hey Guys,
Two new form check videos for you to critique!
First, BB Rows (not Pendlay b/c I am too lazy to set up for them). Set #5 of 5x6.http://www.youtube.com/watch?v=7VImqLO6b04&feature=youtu.be
Second, Squat to Box. I realize that the box probably doesn't get me quite to depth, but I have a major issue with buttwinking, or low back rounding as I get close to depth. I am working on squatting to box without rounding and then will continue to work on depth. I suspect its a hip flexibility thing. This was set #4 of 5x6. Weights are about 60% of ORM, as I just deloaded to work on form and am moving my way back up.http://www.youtube.com/watch?v=6z1KMfX_BMw&feature=youtu.be
Thanks in advance!
You pull your rows too high up on your chest, they should be going lower. Also bring your grip in a bit, your arms should be riding your ribcage, not flaring out.
I can't really speak to box squats, as I hate them and never do them. if you're having trouble with depth though give bottom position BW squats some consideration (this without the weight, and I'm talking about LOTS of volume
http://www.youtube.com/watch?v=uVWv29aRKeg). Take a long pause at the bottom. For me at least I get sore as hell afterwards, but it helped me hold form on normal squat work. 0 -
Bench press and Pendlay(2 vid) for critique:
Bench - 5 reps @ 115 - second working set. My current 1RM is 120 so I am very close to my max effort. I did notice a break down in form on rep 4 & 5.
http://youtu.be/xZJWfkg4U6c
Pendlay Row - 5 reps @ 110 - first working set. Noticed issues with lifting body up as reps go on. I was pulling from the racking bars for the first time. I've been pulling from a few stacked plates, but pulling from the racking bars felt like a better height.
http://youtu.be/k6K5ZpL6M88
Pendlay Row - 5 reps @ 95 - second working set deloaded from 110. Still seeing the issue of the body going up.
http://youtu.be/DmDlf4fow3U
Any pointers are appreciated. I've already take away so many great tips from this thread!0 -
Looking for some advice on my squat. This is 225 lbs. Thank you guys in advance.
http://youtu.be/Q-mKVp0fXa8
I also have this one of my DL. Both of these are working sets.
http://youtu.be/e4H9jA3f2Do
Go a little lower on the squats, and drive your hips forward a bit at the top to bring your *kitten* into it.
To be quite honest, that deadlift weight looks too easy for you. Now you might be one of those folks where everything looks easy, but consider upping the weight and seeing how your form holds up.
thank you rtalencar and sara. I will definitely polish up my squat and try to get down more. As for the DL, i will add more weight and post another vid to see if I can keep my form or at what weight it starts to break. Appreciate it.0 -
Thanks!!!!!!! I don't have the sticking point at lower weights. Lots to work on I really appreciate it you all.
If you don't see the sticking points at lower levels it's a musculature thing and not a form thing (which is good).
Try adding in some targeted glute, hamstring, and quad work. The one that's the weakest is likely what you need to build up (I suspect it's not the quads).
Thanks again. I bet glutes. I do do glute bridges but just with weight plates, not the barbell. I'm guessing barbell glute bridges would be good?0 -
Thanks!!!!!!! I don't have the sticking point at lower weights. Lots to work on I really appreciate it you all.
If you don't see the sticking points at lower levels it's a musculature thing and not a form thing (which is good).
Try adding in some targeted glute, hamstring, and quad work. The one that's the weakest is likely what you need to build up (I suspect it's not the quads).
Thanks again. I bet glutes. I do do glute bridges but just with weight plates, not the barbell. I'm guessing barbell glute bridges would be good?
I am very quad dominant so I do good mornings for hamstring and glute work also.0 -
Thanks again. I bet glutes. I do do glute bridges but just with weight plates, not the barbell. I'm guessing barbell glute bridges would be good?
Good Mornings, SLDLs, glute bridges, glute ham raises.
Check http://www.exrx.net/Lists/Directory.html too0 -
Thanks!!!!!!! I don't have the sticking point at lower weights. Lots to work on I really appreciate it you all.
If you don't see the sticking points at lower levels it's a musculature thing and not a form thing (which is good).
Try adding in some targeted glute, hamstring, and quad work. The one that's the weakest is likely what you need to build up (I suspect it's not the quads).
Thanks again. I bet glutes. I do do glute bridges but just with weight plates, not the barbell. I'm guessing barbell glute bridges would be good?
I am very quad dominant so I do good mornings for hamstring and glute work also.Thanks again. I bet glutes. I do do glute bridges but just with weight plates, not the barbell. I'm guessing barbell glute bridges would be good?
Good Mornings, SLDLs, glute bridges, glute ham raises.
Check http://www.exrx.net/Lists/Directory.html too
Thanks guys 0 -
Bench press and Pendlay(2 vid) for critique:
Bench - 5 reps @ 115 - second working set. My current 1RM is 120 so I am very close to my max effort. I did notice a break down in form on rep 4 & 5.http://youtu.be/xZJWfkg4U6c
Pendlay Row - 5 reps @ 110 - first working set. Noticed issues with lifting body up as reps go on. I was pulling from the racking bars for the first time. I've been pulling from a few stacked plates, but pulling from the racking bars felt like a better height.http://youtu.be/k6K5ZpL6M88
Pendlay Row - 5 reps @ 95 - second working set deloaded from 110. Still seeing the issue of the body going up.http://youtu.be/DmDlf4fow3U
Any pointers are appreciated. I've already take away so many great tips from this thread!
I don't know if I got lost in the other posts or not. Any reviews would be great.0 -
Bench press and Pendlay(2 vid) for critique:
Bench - 5 reps @ 115 - second working set. My current 1RM is 120 so I am very close to my max effort. I did notice a break down in form on rep 4 & 5.http://youtu.be/xZJWfkg4U6c
Pendlay Row - 5 reps @ 110 - first working set. Noticed issues with lifting body up as reps go on. I was pulling from the racking bars for the first time. I've been pulling from a few stacked plates, but pulling from the racking bars felt like a better height.http://youtu.be/k6K5ZpL6M88
Pendlay Row - 5 reps @ 95 - second working set deloaded from 110. Still seeing the issue of the body going up.http://youtu.be/DmDlf4fow3U
Any pointers are appreciated. I've already take away so many great tips from this thread!
I don't know if I got lost in the other posts or not. Any reviews would be great.
Will have a look at the rest later, but for your bench you are not arching your back or incorporating any leg drive.
Check out the "So you think you can bench" series as well as Rippetoe on benching.
http://www.youtube.com/watch?v=EHx1gYTA-Rwhttp://www.youtube.com/watch?v=EHx1gYTA-Rw
http://www.youtube.com/watch?v=FHG8PFBBCnc
http://www.youtube.com/watch?v=sgb-TDul0kc
http://www.youtube.com/watch?v=otHqDLBi1VE
http://www.youtube.com/watch?v=Qj4qt3mCcDQ
http://www.youtube.com/watch?v=0LaYf4KrC1E
http://www.youtube.com/watch?v=iMq1rTaErMc
http://www.youtube.com/watch?v=Kauc-9Dl4fc
http://www.youtube.com/watch?v=SQutODgl2J4
I also like this for 'the basics':
http://www.youtube.com/watch?v=34XRmd3a8_0
That being said - those are really good numbers for your size. You should be able to up your lifts a lot with the above.0 -
Thanks! I'll check them out tonight!0
-
Thanks! I'll check them out tonight!
For bench try dropping some reps and pausing your reps, you need more explosiveness off the chest.
For rows try light high rep cable rows (the kind with separate cables for each arm) or db reverse flyes. Make sure you focus on a hard squeeze at full contraction. It looks like a strength issue.0 -
Thanks! I'll check them out tonight!
For bench try dropping some reps and pausing your reps, you need more explosiveness off the chest.
For rows try light high rep cable rows (the kind with separate cables for each arm) or db reverse flyes. Make sure you focus on a hard squeeze at full contraction. It looks like a strength issue.
I'll work on that for bench. I know I have trouble getting it back up if I don't have the "bounce" off the chest so that will help a lot.
Will do for the rows! I'm coming up to the end of my first 12 weeks of Strong Lifts so I am considering doing a deload to work on form and then add in additional work.0 -
Hi,
I've tried working with trainers at my gym, but none of them seem particularly knowledgeable about the squat. I've viewed the videos by Elite FS and Rippetoe. But either the camera angle prevents me from seeing what they are, or I lack the vocabulary to understand.
If I could get some input on my squat form/technique I would be very grateful. Specifically, I think my tailbone is rounding under. I get the sense from rippetoe that I should be driving my hips up, but from others that I should be driving them forward. Not sure what I'm doing. I also don't know if my knees are coming in. They seem fine to me, but I'm having slight pains on my inner legs which I've heard is a sign they are coming in.
Since it seems the last set is most important, I'll link that first. Then back to the first set (all from different angles).
http://www.youtube.com/watch?v=4bg3ZDJtk20
http://www.youtube.com/watch?v=O2EZ5qcBO3I
http://www.youtube.com/watch?v=V7kcdAG7C_E
http://www.youtube.com/watch?v=q5dls3C5ny8
Thanks0 -
Hi,
I've tried working with trainers at my gym, but none of them seem particularly knowledgeable about the squat. I've viewed the videos by Elite FS and Rippetoe. But either the camera angle prevents me from seeing what they are, or I lack the vocabulary to understand.
If I could get some input on my squat form/technique I would be very grateful. Specifically, I think my tailbone is rounding under. I get the sense from rippetoe that I should be driving my hips up, but from others that I should be driving them forward. Not sure what I'm doing. I also don't know if my knees are coming in. They seem fine to me, but I'm having slight pains on my inner legs which I've heard is a sign they are coming in.
Since it seems the last set is most important, I'll link that first. Then back to the first set (all from different angles).http://www.youtube.com/watch?v=4bg3ZDJtk20http://www.youtube.com/watch?v=O2EZ5qcBO3Ihttp://www.youtube.com/watch?v=V7kcdAG7C_Ehttp://www.youtube.com/watch?v=q5dls3C5ny8
Thanks
First and foremost, in your setup for critique(2), the bar dips on the right. That's a quick way to a torn oblique which (I know from personal experience) hurts like a B*TCH. Work on fixing that.
Second, your descent looks tentative. You need to go down with more conviction so you can utilize more of the stretch reflex coming out of the hole.
In terms of hips up or hips forward, I use hips forward because I'm tremendously quad dominant and need the cue to kick my glutes and hams into action. Really just get the bar up.
Other than that your form didn't look to bad. Are you making decent progress or are you stalling?0 -
Roger. I actually injured my abs recently and they are pretty weak still. Has a lot to do with the tilt.First and foremost, in your setup for critique(2), the bar dips on the right. That's a quick way to a torn oblique which (I know from personal experience) hurts like a B*TCH. Work on fixing that.
Actually I'm trying to stay controlled. I was told early on that if a trainer told me to stop at any point in the descent, I should be able to stop immediately. It does make the lifts tougherSecond, your descent looks tentative. You need to go down with more conviction so you can utilize more of the stretch reflex coming out of the hole.
After watching squat videos all day, I think I'm going to agree with you. For every video I see advocating Rippetoe's method, I see another video decrying it. Strong people on both sides of the fence.In terms of hips up or hips forward, I use hips forward because I'm tremendously quad dominant and need the cue to kick my glutes and hams into action. Really just get the bar up.
This is the second time for me to approach 300 and I'm stalling out again. That being said, I've been doing 5 sets of 5 reps, which I've since learned is pretty crazy. I'm going to drop down to 3x5 or even 1x5 and see if that helps. But I am very worried about my tailbone rounding at the bottom and my knee situation. Don't wanna pack on more weight if these things are jacked.Other than that your form didn't look to bad. Are you making decent progress or are you stalling?
Thank you very much for the review.0
