Polar FT4 Battery Changing issues - PLEASE HELP
KAA1982
Posts: 90 Member
Anyone have any issues getting the battery cover OFF of the Polar FT4 Wear Link? Mine is impossible to get off (tried a quarter, nickel, screwdriver, and also had 3 engineers at work try with tools). My HRM is 5 months old, given as a gift, and the people at Polar are being d*cks about it.
Anyone have suggestions. I love my HRM
Anyone have suggestions. I love my HRM
0
Replies
-
jewelry shop?0
-
I could try there, thanks! It's almost like the part you remove to get to the battery is sealed with glue or something.
My biggest frustration is them saying that is not covered, when I've had it for 5 months.0 -
No help for your cover removal, but you are not alone with the poor service coming from Polar. I recently changed my FT80 battery and the watched never worked correct after. Sent it in (was new in Jan 2012) and they claimed "damage" and not under warranty. They were very rude on the phone and took weeks to respond to emails. For a name that once seemed to be a leader, they are a poor excuse now...........0
-
It has a rubber gasket inside to make it water proof and it likes to stick. The gasket is on the part that you remove so you have to be careful not to damage it unless you bought your battery from Polar that comes with a new gasket.0
-
My old F55 had the o-ring gasket that needed replaced and was way tricky to keep in place during a battery change. A big selling point of the FT series was user change batteries. My family has a FT80, FT60, and FT4, none of which have the replaceable gasket of the old F series.0
-
According to the directions in the users manual, there's some sort of sealing ring on the transmitter so that probably makes it harder to open. I'm getting ready to change mine as well so if I come up with a trick, I'll be sure to pass it on.0
-
I just changed mine about a month ago with no problem but it does have that O ring gasket. I have an FT4 that's about 18 months old.0
-
Using a coin, turn the cover anticlockwise until it will turn no further. With the cover facing down, briskly rap the device on a hard service. Mock engineers.0
-
Thanks everyone. Now I have a BIGGER problem. Changed the battery in the actual watch, and the screen is staying blank. Even tried 2 batteries. Jerks there are saying without proof of purchase they can't help me. It was given to me as a gift 5 months ago, and unfortunately my sister in law no longer has the receipt. I shall be raising hell over this.0
-
Have you tried the battery either way around?0
-
where do you get a new battery for the HRM?
Mine has been dead for months now.0 -
Also, there will be a central contact that may require bending towards the battery to make.0
-
the one drawback of polar is that they want you to send in the whole thing to replace the batteries. The last time I did, it cost $25 but they not only replaced both batteries they also checked to be sure it was operating correctly and was still waterproof, something that is important to me as I like to use mine for swimming.
D0 -
I had that problem too...no real advice, it just took me a long time to do it and in the process I nearly ground out the groove - next time I need to replace the batteries it should be interesting. :grumble:0
-
Anyone have any issues getting the battery cover OFF of the Polar FT4 Wear Link? Mine is impossible to get off (tried a quarter, nickel, screwdriver, and also had 3 engineers at work try with tools). My HRM is 5 months old, given as a gift, and the people at Polar are being d*cks about it.
Anyone have suggestions. I love my HRM
Oh my God, I nearly ruined mine trying to get it off! I had a older gent at work get it off for me-he placed a towel on a workbench, then took a long handled screw driver and bent over it, and applied lots of pressure. It finally came off-what a pain in the *kitten*! Good luck!0 -
I tried replacing the watch battery with a Rayovac battery. 1st one didn't work and the 2nd one did for 2 days, died and lasted 1 more workout before dying. Hoping it's the fact that Rayovac sux (I work for a battery company and our Alkaline batteries which are made in China outlast theirs). I'm hoping Radio Shack has Energizer brand otherwise I'll order online and hope it was just the Rayovac battery. Still not looking forward to when I need to replace the actual Wear Link...0
-
I also used a Rayovac battery that worked for 2 days and then crapped out. I put the other one in the pack in to get through until I have time to get a new one, but that makes two of us, hopefully it really is down to the battery being crap!0
-
We took ours to a watch guy in our mall.0
-
where do you get a new battery for the HRM?
Mine has been dead for months now.
eBay0 -
SUPER!!! Mine is ready to die. It shows about 1/4 life left. I hope I don't have the same issue. For those who tried the Raovac and had little success, what brand did you finally find that worked (If you found one that works)?0
-
I sucked it up and bought the real thing from Polar. Figured it was worth it to not wreck my HRM.0
-
Did you have to send your watch to them or were you able to do it yourself?0
-
Anyone have any issues getting the battery cover OFF of the Polar FT4 Wear Link? Mine is impossible to get off (tried a quarter, nickel, screwdriver, and also had 3 engineers at work try with tools). My HRM is 5 months old, given as a gift, and the people at Polar are being d*cks about it.
Anyone have suggestions. I love my HRM
Oh my God, I nearly ruined mine trying to get it off! I had a older gent at work get it off for me-he placed a towel on a workbench, then took a long handled screw driver and bent over it, and applied lots of pressure. It finally came off-what a pain in the *kitten*! Good luck!
Hallelujah for old gents! I was looking for a post regarding this problem and found this old thread. I tried the towel on a workbench / large screwdriver method and it worked. THANK YOU!!!0 -
Try a really really thin razor blade.
I have the Polar FT4, and the backs just seem to pop off quite easily on the transmitter. Never tried it with the watch though!0 -
All I can say...I'm not looking forward to the time it comes to change mine...0
-
great post, i will save advice for future0
-
I got my replacement battery at Radio Shack and removed the cover with a flat metal manicure tool. Haven't had any problems since I changed it.0
-
No help for your cover removal, but you are not alone with the poor service coming from Polar. I recently changed my FT80 battery and the watched never worked correct after. Sent it in (was new in Jan 2012) and they claimed "damage" and not under warranty. They were very rude on the phone and took weeks to respond to emails. For a name that once seemed to be a leader, they are a poor excuse now...........0
-
The wearlink cover is not coming off at all and unfortunately with all the items I tried to use to open it (dime, quarter, nickel, screwdriver) have completely chipped the plastic away making it seemingly impossible to open. All I can think of is to somehow attach something to the face of the cover that has a strong suction to then twist it open like that but I don't know where to find such a machine at all. What would any of you suggest in opening something where the slot has been stripped away?0
-
Same thing happened to mine. I just sent only the Wearlink in to them and they gave me a new back cover and changed the battery for $18. It took about a week in total for me to send it in and to get it back.0
This discussion has been closed.
Categories
- All Categories
- 1.4M Health, Wellness and Goals
- 393.6K Introduce Yourself
- 43.8K Getting Started
- 260.3K Health and Weight Loss
- 176K Food and Nutrition
- 47.5K Recipes
- 232.6K Fitness and Exercise
- 431 Sleep, Mindfulness and Overall Wellness
- 6.5K Goal: Maintaining Weight
- 8.6K Goal: Gaining Weight and Body Building
- 153K Motivation and Support
- 8K Challenges
- 1.3K Debate Club
- 96.3K Chit-Chat
- 2.5K Fun and Games
- 3.8K MyFitnessPal Information
- 24 News and Announcements
- 1.1K Feature Suggestions and Ideas
- 2.6K MyFitnessPal Tech Support Questions