DIY pull up bar

jc1961AA · April 2018

I am thinking to build a DIY pull up bar using a galvanised pipe and some wooden posts, the only problem is that my garden is not suitable (my second half won't let me fit something that is visible), but by the side of my shed i got this concreted area that is hidden. If I use the following post bases (https://www.ebay.co.uk/itm/5-9-150MM-GALVANISED-BOLT-DOWN-BOLT-GRIP-FENCE-POST-SUPPORT-TIMBER-HOLDER/142527042862?_trkparms=aid=222007&algo=SIM.MBE&ao=1&asc=20160908110712&meid=6bd16d898a34478fa23b21eb75b89b8a&pid=100677&rk=14&rkt=30&sd=131897806410&itm=142527042862&_trksid=p2385738.c100677.m4598), bolted to the concrete base, could anyone tell me if it would work (i weight around 77kg)? TIA
J

festerw · April 2018

Probably not for long unless you brace it from the sides. Ideally you'll want a couple feet of post into the ground.

alteredsteve175 · April 2018

Can you attach the posts to the shed? That might work in conjunction with the post bases.

jc1961AA · April 2018

Thank you both, that's what i thought. I will have to check how strong the shed side is. Shame if I can't.

bjdw_1977 · April 2018

Can't beat a good old fashioned A-frame. It's not permanent and it's easy to dismantle if you want to move it.

BigGuy47 · April 2018

Here's a site with various pipe fittings that could be useful if you decide to design your frame yourself.

https://www.growerssupply.com/farm/supplies/cat1;gs_greenhouse_building_materials;gs_quik_klamp_pipe_fittings_5.html

jc1961AA · April 2018

BigGuy47 wrote: »

Here's a site with various pipe fittings that could be useful if you decide to design your frame yourself.

https://www.growerssupply.com/farm/supplies/cat1;gs_greenhouse_building_materials;gs_quik_klamp_pipe_fittings_5.html

Thanks, but I am UK based, still worth having a look. My wife actually gave me the go ahead to go on the other side of our shed. It's about 1.50m by 3.50m, so I think that it's enough to setup a pull up bar and parallel bar too!!! I need to find some very good plan and really put my thinking hat on, I don't want to rush (as I usually do) and do a bad job of it.

jc1961AA · April 2018

Sorry, I meant the area that I have to build the apparatus is 1.50m by 3.50m, so enough room to do it

DIY pull up bar

Replies

Categories