That's why I'm typing a track so I'mgonna go

willisjamie310

That's why I'm typing a track so I'mgonna go I do connection are three and then hit enter now ready to type in the IP address in this case 23 dads are all get this one the first IP so it'll be twenty 3.1 IP address K one 72 dot 16 dot 20 3.1 and I'll do I need to slash 30 mask there we go this one has a DC interface the reason I could tell if you click on here and have your mouse I you'll see a little clock on there you see that's a DC interface so I this is a DC interface latter set clock rate saw the clock rate and I'm going to do I will 228,000 again K clock rate is now set I'm not going to do now shut down now it will not go up because router three is not configured so there we go now I'm ready to configure interface GE 0 site 0 some type interface GE 0 slash 0 and now I'm in interface that interface I’ll give it a description connection and to ISP what's a and now I'm going to give it an IP address and I will give it the first available IP address that subnet solve a 2009 doubt 165 top 200 dot T 25 there we go so as the IP address and I need to give it a mask and <a href="http://400-101cisco.com/">400-101</a&gt; I believe that top internet connection was a 248 and then I'm going to type no shut down on that and I should come up and it did for now to configure the loopback interface of the never done one of these before this is how you do it type interface an airtight I'll 0 I for loopback interface 0 and then we're going to head Kenner and there we go that brings it up immediately and we're going to give it a description description I simulated web server simulated web surfers were all caught and I will give it an IP address 10 dot and not and not 10 and I will give it a mask in that sense it's a direct I Pare given a basketball ones Hannah there you go that's how you configure the loopback interface the reason I want to do this later I'mgonna show you how to configure some routing entries using OSPF and I want to make sure that we have something to route to in this case it'll be the web.
<a href="http://400-101cisco.com/">http://400-101cisco.com/</a&gt;