SL 5x5 Form Check

That deadlift is really going to need some work. It looks like you're doing it all with your back, and that spells huge trouble once you start putting any weight on the bar. Bend more at the knee, and make sure you start the motion by driving through your heels. Your chest should be outward, and your back should be concave in sort of the same manner like when you're at depth in the squat. Your back should never really change position, instead you should be pulling your hips forward in order to make the transition into vertical.

Also, watch the arc of motion your head goes through during the lift. There is always going to be some arc just by virtue of the way a deadlift is performed, but it should be kept to a minimum. This is also a symptom of not keeping your neck in alignment with your back. Basically, pick a spot a few feet in front of you, stare at it, and then keep staring in the same vertical line as you move upward. Don't allow your neck to become misaligned with your spine. Your head is moving in a sweeping circular path, take a look at this video, what you're doing is the upper left incorrect motion at around the 1:40 mark:

https://www.youtube.com/watch?v=-4qRntuXBSc

I would suggest starting the deadlift with bumper plates (the rubber ones that are the same diameter at all weights) at something really small like 10lbs a piece just so you're not having to reach all the way to the floor to grab the bar, and are not putting a lot of weight on. But, definitely bend at the knee more, and keep the back concave.

Onto the row...

The row is my favorite lift. I don't know why, it just suits me. My suggestions for your row are largely the same as my suggestions for your deadlift.

Bend at the knee a little more, and make sure your back isn't as flat, and parallel to the ground. Of course, don't be as vertical as you would be for a squat, or a deadlift, but you should be at a small angle with the floor instead of parallel. Again, make sure your neck is in line with your spine. Pick the same spot on the floor as you did with your deadlift, stare at it, and fix your gaze. Since you're not moving through space with a row, you don't have to follow the path vertically. Just get into position at the bar, pick your spot to stare at, and complete the lift.

It also looks like you're pulling the bar more into your stomach area when it should be going into your chest.

I would suggest getting a feel for how your body should be positioned by starting with some mid-weight dumbells (a weight that isn't heavy for you, but something you're not going to lift with ease either). Straddle a weight bench with one of your knees, put your other leg straight out to the side of you with only enough bending at the knee to get a stable base, then put your the arm on the same side of your body that your knee is straddling the bench with straight down like you're at the top of a push up. This should force you into the correct positioning for your body, and you should notice that your back is bent with your butt is just above your heel on the leg with the knee straddling the bench.

You should be able to reach down with your free arm to pick up the weight, and move it up to your chest to complete the lift. Don't forget to pick your staring spot a few feet in front of you to keep your neck/spine alignment. When completing the lift, you should not be engaging your shoulder, dipping your butt, or dipping your knee on the leg out to the side. The lift should be completed using only the arm, and the back muscles it activates. You should notice that the dumbbell naturally wants to follow a path directly into your chest.

Then repeat on the other side. You should notice your back is probably in the ballpark of 25 - 30 degrees from parallel, and then translate that to the bar when you're ready.

Here's a video for the dumbbell row:

https://www.youtube.com/watch?v=-koP10y1qZI

Now that I've written that whole book... lol. I would only suggest getting yourself a pair of flat bottomed shoes because you're not going to activate your stabalizing muscles as much if you're wearing either running shoes, or cross trainers since they're cushioned. A lot of people, including myself, like Chuck Taylor's, but other people lift barefoot, or get those super advanced $200 lifting shoes that will do nothing for you if you're not already at a high level.

I am pretty new to SL5x5 and have been reading and YouTub-ing a lot on form. @CarlydogsMom said it perfectly.

Another thing that can help is to visualize that straight-line bar path when lifting.

And, when lifting heavier with the row and deadlift, I pump out my chest (which pulls back my scapular region) to keep my back from rounding. And, for the row, think of thrusting that bar just below the rib cage with elbows to the sky.

Also it may help to think of holding a ball between the chin and chest to keep the neck neutral.

First and foremost it appears you don't know how to properly brace your core. I mention this first because this is absolutely crucial to keeping your spine safe. Watch and practice how to brace properly. This is the best video I've found so far because it is concise: https://www.youtube.com/watch?v=_StSjmX1BOg

Squats - don't use running shoes. wear some flat shoes or go barefoot instead. You are not bracing your core properly because your lower back is flexing. And that is just with an empty bar - add enough weight to it and you will crumble. There should be no movement or rounding in your lower back; it must be stable.

Bench - your back doesn't seem tight. when the weight gets heavier, if your back is not tight then it will collapse. you must learn to retract your shoulder blades, and then use leg drive to maintain stability. these two videos will explain the concept:

https://www.youtube.com/watch?v=GIqcXj2pAPA
https://www.youtube.com/watch?v=JVBUgvsMNtk

also, i can't tell for sure from the angle you took the video, but your bar placement seems too narrow. it appears that your forearms are caving in, as opposed to being vertical:

Deadlift - your mechanics are completely wrong. watch this video, it's the best guide i've ever seen on deadlifts: https://www.youtube.com/watch?v=K3izzg0RCTg

Rows - once again, as in your squat, little to no core stability. your back is rounding.


Once more I must stress core bracing. Please learn and practice this first. I feel the first video is adequate enough to teach you the technique, but in case you need a little bit more explanation watch this:

from (1:00-6:45)
https://www.youtube.com/watch?v=ibH_B0ZGvrU

and this (from 3:20 and on)
https://www.youtube.com/watch?v=zX73Kn_ZHD0

I think everyone's given great advice. I'll just chime in with what i'm seeing.

Squat, you are leaning too far forward. Not quite dropping your chest, but, it may just be the shoes you're wearing. Focus on sticking your butt out more, and if it helps you can look up ahead. Try and see if that helps you get the hang of the proper form. You definitely want to get the hang of having the bar moving directly up and down in a straight line, because once it's loaded down with weight you dont want to lose your balance.

The bench, you need to slow down your descent (although i realize this bar was unloaded) and keep your elbows in. It looks like you might have either a too narrow grip or uneven grip just judging by the way that it's wobbling around. Either way, i'd start by focusing on the bar moving in a simple, straight line. More controlled. Focus on the chest while you're doing this.

I'm okay with the OHP.

But the two you really need to work on is the deadlift and row. Both of them you are putting a significant amount of the stress on your back. Deadlifts, keep your chest up and your butt out. Focus on the feeling in the hamstrings/glutes. Again, this may be due to the shoes youre wearing affecting your posture. But you're leaning too far forward i think. Legs should bend more, and your butt should be back more.

The row, you are dropping your chest way too low. Focus on using your back in a slow and controlled movement. I like to imagine that i'm pulling the weight up into my belly button/waist.

Overall, i'd say focus on the bar movement being fluid and solid. Slow and controlled. You should be actively focusing on using the intended muscles during the movement, and keeping a strong tight core and proper spine posture during the entire exercise. As i've said to some of the people i've trained, I want you to imagine that i'm taking a picture of you during the movement. You should be slow and controlled and the bar should be moving in the same line.

IsaackGMOON wrote: »

Not sure if I'm late or not but I'll chime in with what I've noticed;

• Squats: It seems your heel is rising off the ground a little bit, I reckon it's to do with the shoes you are wearing. Try a trainer which is flat footed (i.e. converse) or a trainer with minimal heel drop. Your head is also at a weird angle (I did this on my first time), which can potentially put strain on your neck and spine. Mark Rippetoe has great advice on this; https://youtu.be/QhVC_AnZYYM?t=1m
• Deadlift: I know there aren't any weights on the bar to make it rise from the ground but with this instance, it seems you are using your back more than your legs.

That video was terrifying and informative, thank you I feel the best advice I've heard is Rippetoe's 'shove that thing up' - tried it today and it made an immediate difference to my squats, no knee collapse, no weird 'what's that niggling pain?' etc. Genuinely felt that today is the day I can progress with my squats and keep putting weight on the bars without injuring myself and being more confident in my form.