Barbell Bench Press without spotter
Replies
-
I guess I'm lucky, I belong to a lifting gym, there is usually always someone around to spot me, even the gym owner. My advice would be to get to know your fellow gym members, unless it is someone who seems anti-social, most lifters won't mind giving a spot, but pick your spotters carefully, not everyone knows how to do a proper spot.0
-
I guess I'm lucky, I belong to a lifting gym, there is usually always someone around to spot me, even the gym owner. My advice would be to get to know your fellow gym members, unless it is someone who seems anti-social, most lifters won't mind giving a spot, but pick your spotters carefully, not everyone knows how to do a proper spot.
There's a guy at my gym who won't talk to me anymore. His ego was hurt when after a set of him spotting me I said, "oh....I think I'm alright actually, no thank you".1 -
Look if they can ask me all the time then I can ask them. My problem is most people can't spot worth a damn. Then you have to tell them what you want or else they'll f**k your s**t up! Plus if I have to educate someone on how to spot it's throws me off if I'm maxing out. Basically I tell them to keep an eye on me, only grab it if I tell you to.
So you have never gone to failure and there's no need to, some of you say. Hmm...so how do you know to stop one rep short(meaning you're shorting yourself), how do you know you can't do what you did last time or can, you don't ever do negatives? So in reality you're not a bencher just a workout guy going for a certain number of reps quitting just shy of failure, but how do you know that rep was the failure rep?
And to have a program for the bench that never takes you near failure isn't a bench program. Plus even if you're doing one of those programs what if something happens with a lesser weight? Accident's happen. Find a partner and a new program.
So you people have never failed during a workout? How do you know something for sure unless you've tried it? Failure is what you build upon. If you don't know failure, how do you know success? If you've never failed, how do you know what's possible?
Yeah I know, I'm a smart @zz today. JMHO
I used calculations from AMRAPS and volume PRS to adjust my 1rm. I test my 1 rm few times per year, most likely on the platform. Testing it constantly in the gym may stifle my effort if it is fatiguing. I bench 4x per week.
Do your calculations put you pretty close at a meet? I've been training my nephew for the past 5 years, but he is gaining muscle so fast it's hard to gauge him. I power lifted for 12 years, stopped at age 34, I'm 51 now. Would love to do one more meet.
Yep. At this point I've had programs written for me, so I can put my estimated max based on AMRAPS or a max I have hit in the gym/meet into my excel programming, and then run a percentage based program for 9 weeks based on that max, and come out with a PR on meet day...if I'm not having a rough meet.
You should do one!Look if they can ask me all the time then I can ask them. My problem is most people can't spot worth a damn. Then you have to tell them what you want or else they'll f**k your s**t up! Plus if I have to educate someone on how to spot it's throws me off if I'm maxing out. Basically I tell them to keep an eye on me, only grab it if I tell you to.
So you have never gone to failure and there's no need to, some of you say. Hmm...so how do you know to stop one rep short(meaning you're shorting yourself), how do you know you can't do what you did last time or can, you don't ever do negatives? So in reality you're not a bencher just a workout guy going for a certain number of reps quitting just shy of failure, but how do you know that rep was the failure rep?
And to have a program for the bench that never takes you near failure isn't a bench program. Plus even if you're doing one of those programs what if something happens with a lesser weight? Accident's happen. Find a partner and a new program.
So you people have never failed during a workout? How do you know something for sure unless you've tried it? Failure is what you build upon. If you don't know failure, how do you know success? If you've never failed, how do you know what's possible?
Yeah I know, I'm a smart @zz today. JMHO
I used calculations from AMRAPS and volume PRS to adjust my 1rm. I test my 1 rm few times per year, most likely on the platform. Testing it constantly in the gym may stifle my effort if it is fatiguing. I bench 4x per week.
Do your calculations put you pretty close at a meet? I've been training my nephew for the past 5 years, but he is gaining muscle so fast it's hard to gauge him. I power lifted for 12 years, stopped at age 34, I'm 51 now. Would love to do one more meet.
Yep. At this point I've had programs written for me, so I can put my estimated max based on AMRAPS or a max I have hit in the gym/meet into my excel programming, and then run a percentage based program for 9 weeks based on that max, and come out with a PR on meet day...if I'm not having a rough meet.
You should do one!
I'm working to a state record(402) in my weight class and age group. Right now I'm at 425 flat bench 380 incline. Both are TNG. We'll see what happens later in the year. Still working with nephew Sophomore 15 year old, 5'10 183 lbs 6%BF. He has a SQ 455, BP 325 DL 460.1 -
I've thrown a bench under the smith machine before so I could go full ROM without crushing myself... but it seems to void stability muscle groups, so I'm not sure it's the best.3
-
I will actually ask people how they want to be spotted. Some people just want to make sure they don't drop the bar on their neck, some want a lift-off, some don't, some want you help them cheat by keeping your fingers under the bar; so I always ask how they want to be spotted.
My problem is that early morning there's only one or two guys that can spot me, so if they're not around I can only go so far.0 -
Never use collars when benching without spotters so you can dump the weight
Have you actually ever tried doing this?
It doesn't work because if you can't lift the bar to begin with, you still won't be able to upend it to slip 1/2 of the weight off. If you're using a bar that you CAN upend, then you aren't doing a realistic test of this theory.
I have actually tried doing this while using the safety bars on my rack and failed miserably. Without the safety bars, I'd be dead.
3 -
Never use collars when benching without spotters so you can dump the weight
Have you actually ever tried doing this?
It doesn't work because if you can't lift the bar to begin with, you still won't be able to upend it to slip 1/2 of the weight off. If you're using a bar that you CAN upend, then you aren't doing a realistic test of this theory.
I have actually tried doing this while using the safety bars on my rack and failed miserably. Without the safety bars, I'd be dead.
If you get stabled, just roll to one side the weight will pull the bar over but you can't have safety bars in the way. It's embarrassing as hell but it works. Not to mention you can hurt somebody else if they're not paying attention.
1 -
Yes, I've done it, you just lean to the side. Sounds crazy loud when all the plates fall off...2
-
My gym is way too small to dump plates off the bars to the side, I'd hit someone. I always use the safety pins.2
-
cbohling1987 wrote: »My gym is way too small to dump plates off the bars to the side, I'd hit someone. I always use the safety pins.
That's the best bet. Don't want to hurt anybody else or yourself.0 -
Never use collars when benching without spotters so you can dump the weight
Have you actually ever tried doing this?
It doesn't work because if you can't lift the bar to begin with, you still won't be able to upend it to slip 1/2 of the weight off. If you're using a bar that you CAN upend, then you aren't doing a realistic test of this theory.
I have actually tried doing this while using the safety bars on my rack and failed miserably. Without the safety bars, I'd be dead.
No, but I've seen it done... it can be alarming for bystanders, but it works.1 -
I've rolled the bar down my chest before. I have only slipped it off w/o collars when squatting and had to bail.0
-
Jonnydebrasco wrote: »I have a home gym and workout by myself. I dont have someone to spot me but I bench press in my squat rack as mentioned above just in case but never needed it really. I would say do them and when you notice that your having trouble take extra rest and try again or a little less weight extra reps.
This. I also lift at home and bench in my squat rack... And I have needed it once and I'm glad I was in there!0 -
I workout alone. I've gotten to know a few of the guys at the gym and I have no problem asking them for an occasional spot. One even told me if he's at the gym when I'm benching, I can always ask him to give me a lift-off and spot for me3
-
I lift at home - no spotters - I've had to roll the bar off a few times - I never thought of it as " the roll of shame" It means I tried for 1 more rep. I'm a little more cautious these days & try to stop just short of actual failure - you know you've got it when you have to grind out the last one - Eastcoast Jim3
-
Another in the rack on intensity day person here. I do bench on the normal bench on volume day but I normally have 1 left in me. I just don't feel safe doing 5x1 or 3x2 at 90+% 1rm unless I have a spotter or in the rack. Doing 5x6-8 at 75% doesn't scare me as much and I just leave collars off and can dump if needed.
Oh, I think you absolutely need to test yourself every now and then. I test the big 3 about every 7-8 weeks. Then I know for sure what to base my next cycle off of. I just don't trust the calculations off an AMRAP unless it's like 3 reps. If you are doing that then your not stressing yourself much more by just doing a true max.0 -
Dumping a bar is something you would only do in an emergency. Hopefully you would never get in that situation.
You don't want to kill yourself training alone and having the bar crushing your neck. Not sure what is meant by "rolling" the bar. I presume it means having the bar stuck on your chest and rolling it toward your waist. Not a smart way to go. The bar could accidentally go toward your neck and crush you!
(And yes I have dumped a bar after getting buried on a bench press. I have also gotten pinned in a vertical leg press and there is a trick to getting out of that too!)
If I was in a populated gym I would just ask someone for a spot if I thought I needed one. There are also lots of machines in a gym to use instead of free weights.
I train alone at home and use a power rack to bench in. Safety pins are always used even with lighter weight. I could blow out my shoulder and get stuck even with moderate weights.0 -
With a spotter, It removes some of the doubt and you can focus more on the lift.3
-
Doing benchpress (just about any compound lifts to be honest) to failure each and every time is not advised in my opinion. The idea is to have something left in the tank without having the CNS depleted. You can have days where you can lift to failure, and on those days you could ensure you have a spotter - otherwise idea is to keep your RPE range somewhere in 8 or 9 if you have to.0
-
Again, great advice--thanks, everyone. I'll have to stick with lower weight on decline press for the most part, and get a spotter (which really isn't an issue for a single set) when pushing higher.0
-
Who said take each set to failure? I use a spotter for sets I'm unsure of. Doesn't matter the rep or weight, it's if I'm not sure I can get to a the last rep. I'm still gonna try to get my set. You dumping dumbells is the same as a barbell spotter. If I work hard on tri's, lats, anything to help increase strength and after 6 weeks go for a new max I'll definitely have a spotter because I don't know how much strength I've gained. If you're in it for strength or power lifting then yes, have a spotter. If you're bodybuilding then don't worry about it.1
-
I have never ever asked anyone to spot me, if I feel like I'm not going to make the next rep, I stop. Yes it's important to push yourself and that last rep is also important but you will be fine without it.1
-
So in other words you've never failed at an attempt? If you're bodybuilding I understand. If you're power lifting then I don't. I've felt good and knew I would be able to hit a PR and failed. I've been tired, not feeling it and hit PR's. You never know how it will turn out. You may be 2 reps weaker and not know it. That's why I use a spot, because I'm not sure. That's why my bench is at 425 and incline 380, but then again I power lift.
1 -
So in other words you've never failed at an attempt? If you're bodybuilding I understand. If you're power lifting then I don't. I've felt good and knew I would be able to hit a PR and failed. I've been tired, not feeling it and hit PR's. You never know how it will turn out. You may be 2 reps weaker and not know it. That's why I use a spot, because I'm not sure. That's why my bench is at 425 and incline 380, but then again I power lift.
I think that those of us you are not understanding, have specific programming. I program in a volume block, a peak, a taper and a deload. I WILL test my max and yes I've failed, but not until after that taper and deload so that I can see the benefits of strength I've acquired across a PROPER daily undulating strength training cycle. Therefore, I won't need a spotter until I'm into my peaking stage as the intensity has greatly increased and my reps/volume have decreased.
I rarely just go in and willy nilly test my max. Unless it's my birthday or I'm extremely pissed off2 -
So in other words you've never failed at an attempt? If you're bodybuilding I understand. If you're power lifting then I don't. I've felt good and knew I would be able to hit a PR and failed. I've been tired, not feeling it and hit PR's. You never know how it will turn out. You may be 2 reps weaker and not know it. That's why I use a spot, because I'm not sure. That's why my bench is at 425 and incline 380, but then again I power lift.
I think that those of us you are not understanding, have specific programming. I program in a volume block, a peak, a taper and a deload. I WILL test my max and yes I've failed, but not until after that taper and deload so that I can see the benefits of strength I've acquired across a PROPER daily undulating strength training cycle. Therefore, I won't need a spotter until I'm into my peaking stage as the intensity has greatly increased and my reps/volume have decreased.
I rarely just go in and willy nilly test my max. Unless it's my birthday or I'm extremely pissed off
There again, I power lift, every 6 weeks or so I'll max, I will have a spotter. Even if I feel like a max rep football combine test with 225 I'll have a spotter because I want to better my last PR. Even if I'm doing sets of 10, something may go wrong, you never know. But that's just me, If I'm unsure, I'll ask for a spot. It's not a technical thing, it's a how I feel thing. I have more confidence with a spotter it keeps doubt out of my mind. You could injure yourself in the middle of any rep no matter what the weight and need a spotter. You never know. I'm glad that most people don't fail and know their strength to the pound. I know if I'm 5 lbs heavier I lift more and 5 lbs lighter lift less. Guess I need to weigh myself in the gym before lifting. It's no big deal, it's just an opinion. What works for one may not work for another. This is what works for me.1 -
So in other words you've never failed at an attempt? If you're bodybuilding I understand. If you're power lifting then I don't. I've felt good and knew I would be able to hit a PR and failed. I've been tired, not feeling it and hit PR's. You never know how it will turn out. You may be 2 reps weaker and not know it. That's why I use a spot, because I'm not sure. That's why my bench is at 425 and incline 380, but then again I power lift.
I think that those of us you are not understanding, have specific programming. I program in a volume block, a peak, a taper and a deload. I WILL test my max and yes I've failed, but not until after that taper and deload so that I can see the benefits of strength I've acquired across a PROPER daily undulating strength training cycle. Therefore, I won't need a spotter until I'm into my peaking stage as the intensity has greatly increased and my reps/volume have decreased.
I rarely just go in and willy nilly test my max. Unless it's my birthday or I'm extremely pissed off
There again, I power lift, every 6 weeks or so I'll max, I will have a spotter. Even if I feel like a max rep football combine test with 225 I'll have a spotter because I want to better my last PR. Even if I'm doing sets of 10, something may go wrong, you never know. But that's just me, If I'm unsure, I'll ask for a spot. It's not a technical thing, it's a how I feel thing. I have more confidence with a spotter it keeps doubt out of my mind. You could injure yourself in the middle of any rep no matter what the weight and need a spotter. You never know. I'm glad that most people don't fail and know their strength to the pound. I know if I'm 5 lbs heavier I lift more and 5 lbs lighter lift less. Guess I need to weigh myself in the gym before lifting. It's no big deal, it's just an opinion. What works for one may not work for another. This is what works for me.
I think I was misreading what you meant for yourself, that you just like to have a spotter, period. But I think that you were assuming we don't max out ever. Sorry, just a bit of confusion.1 -
Sometimes you need a spotter. That's all...some people say they don't need one because they stop a rep or 2 early or they never max. I understand that if you're a body builder and you flex while you lift. But as for power lifting you're gonna push the limits or you're just sand bagging your workouts. I wish I were one of those people that never fail, but then again I wouldn't be pushing myself either. Like I said, I max out every 6-8 weeks, but in between I push some sets to the edge and may need a spotter then too. I never said take each set to failure. I don't know why someone would say that. I've never seen someone do that ever. That's just stupid. What I said was if you've never failed how do you know what you can do? Even if you calculate everything out there's still to many variables to be dead on correct. I know most power lifters PR is higher in the gym than their meet PR's.
2 -
Sometimes you need a spotter. That's all...some people say they don't need one because they stop a rep or 2 early or they never max. I understand that if you're a body builder and you flex while you lift. But as for power lifting you're gonna push the limits or you're just sand bagging your workouts. I wish I were one of those people that never fail, but then again I wouldn't be pushing myself either. Like I said, I max out every 6-8 weeks, but in between I push some sets to the edge and may need a spotter then too. I never said take each set to failure. I don't know why someone would say that. I've never seen someone do that ever. That's just stupid. What I said was if you've never failed how do you know what you can do? Even if you calculate everything out there's still to many variables to be dead on correct. I know most power lifters PR is higher in the gym than their meet PR's.
There are plenty of top powerlifters who only fail reps at meets.
Whose training program and system doesn't permit failure during training.
0 -
Hi all--I've been looking over quite a few of the beginner/intermediate weight training programs posted in the link provided in the sticky thread up top, and many of them recommend progressive overload with 5 or so reps of traditional barbell bench presses. I've avoided the barbell in the past when I don't go to the gym with a regular workout partner, since it simply doesn't seem safe to push an appropriate amount of weight (viz., 5 reps with the last being close to failure) without a spotter. I've been using dumbbells instead. I have no problem asking Random Dude #352 to spot for a set, but doing so for several sets is just inconsiderate.
So, any advice is appreciated. Stick with dumbbells? Go lower, "safe" weight on the barbell, and, if so, increase reps?
Thanks!
I think you should do a few sets leading up to your 5 rep set, but I will say when I started out doing the Bench I had the same thought and I'd ask someone to help with each set. Id pick someone and I'd ask hey are you gonna be around for a few more and most are actually more than happy to help, most people seem to like spotting. If you can sense that someone has no interest don't bother though they won't help and theuy'll just lift the bar up and screw up your set, hate that, I"ve had that happen to me before.0 -
Two thoughts. First change the progressive over load to drop sets or reduced pyramids. When you max out the weight will be less.... easier to rerack as we always feel failure coming. Second. Use a Smith Machime with safety stops set properly.... the mental security will help you push past your limit with no spotter. Don’t dump weights. Dumping weights can cause excessive strain on the shoulder and rotator cuff ... especially if you get to an awkward angle and try to “save” the bar if things go wrong. Good luck. Stay safe. And keep lifting.0
This discussion has been closed.
Categories
- All Categories
- 1.4M Health, Wellness and Goals
- 393.6K Introduce Yourself
- 43.8K Getting Started
- 260.3K Health and Weight Loss
- 175.9K Food and Nutrition
- 47.5K Recipes
- 232.5K Fitness and Exercise
- 430 Sleep, Mindfulness and Overall Wellness
- 6.5K Goal: Maintaining Weight
- 8.5K Goal: Gaining Weight and Body Building
- 153K Motivation and Support
- 8K Challenges
- 1.3K Debate Club
- 96.3K Chit-Chat
- 2.5K Fun and Games
- 3.8K MyFitnessPal Information
- 24 News and Announcements
- 1.1K Feature Suggestions and Ideas
- 2.6K MyFitnessPal Tech Support Questions