Thoughts on weight to use for 20 rep squats
pdmatthews
Posts: 37 Member
Hi
Interested in opinions for a decent weight for a 20 rep squat set on a body weight multiplier
So for 20 reps would you load bar with say 1x bodyweight ? 1.25x 1.5x 2x ?
Thanks in advance
Interested in opinions for a decent weight for a 20 rep squat set on a body weight multiplier
So for 20 reps would you load bar with say 1x bodyweight ? 1.25x 1.5x 2x ?
Thanks in advance
2
Replies
-
I feel like "depends on your training volume" figures into the answer, but I am a dilettante and just here for the math equation that goes with this story problem.
4 -
I was thinking 3 warm ups, 1-2 feeler sets and then in for 200
-
I usually do a reverse pyramid for all my weights...so I start heavy, then move to lighter...5 sets of 8-12 reps, trying to reach failure each set, so the last 1-3 reps are really a struggle in any given set...currently I weigh 160ish and usually squat starting with 60 lbs and reducing if needed between sets (or sometimes even between reps), so 0.4x body weight added for me (1.4x if you are going with my weight plus the added weight).
If you can squat 2x body weight now, then start there...and if you don't make it through all 20, then stop when you need to and lighten the load until you get all the way to your goal of 20 reps.0 -
Don’t usually do 20 rep squats tbh
But when I have its been
At the start of a session approx x1.4 bw 315lb
As a finisher x1 bw 220
1 -
I would never do a 20 rep set of squats. But my goal is hypertrophy not endurance. From my (limited) understanding of the research, it’s not necessary to do so many reps to achieve hypertrophy. And too much volume for those with strength goals. There are others better qualified on this forum than me though.
Plus I just follow the programme I’m following and that is 4 sets of 3 to 5 reps each currently.
What’s your goal?4 -
My goal normally is strength - this is simply a challenge I may throw in from time to time. I got 18 with my bodyweight on bar and I guess what I’m really trying to gauge is whether that’s a decent showing or not. 1.4x seems a way off for me for instance1
-
pdmatthews wrote: »My goal normally is strength - this is simply a challenge I may throw in from time to time. I got 18 with my bodyweight on bar and I guess what I’m really trying to gauge is whether that’s a decent showing or not. 1.4x seems a way off for me for instance
Ah ok, I understand. The thought of squatting 20 times with 135 pounds on my back (current body weight) makes my eyes water. I’m nesh though (a coward)2 -
Use https://strengthlevel.com/one-rep-max-calculator for a rough guide2
-
I do 20 rep goblet squats with a kettlebell. Right now it's 40lbs. I'm just getting my strength back up after having a baby so I'm not a good example.
However it's not about the weight for me, it's about perfecting my form, feeling the muscles working with a solid mind-muscle connection and it ends up being a bit of endurance too.3 -
Use https://strengthlevel.com/one-rep-max-calculator for a rough guide
That seems pretty good 60% for 20 i am just about there on then. Although my 1RM is a bit poverty !!
Thanks everyone. I’d welcome any more thoughts
0 -
Not exactly my jam right now but I did a program years ago based off of Super Squats. It had the very dubious moniker of "Milk and Squats" which sounds absolutely horrific.
Seemed at the time (and still to this day) to be solidly based on bro-science with its promise of MASS!, but like you I was doing it solely as a challenge and to shake up on my regular 5x3 routine-
Anyway I searched the browser, since this piqued my interest, and here is a "mathy" answer based on "milk squats".To determine your starting weight for the 20-rep squats, take your current 5-RM and subtract 5 lbs for each scheduled workout. So, if your current 5RM is 315 lbs and you are planning to train 3x/week for 6 weeks (18 workouts), you should begin with 225 lbs. (18 workouts x 5 lbs per workout = 90 lbs). Subtracting 90 from 315 gives you 225. Attempt to add 5 lbs. to your squat every workout.
Anywho, enjoy.3 -
Honestly I have no clue nor would I find it useful for training compared to other schemes.
A decent weight? That is going to depend on the individual and their training history.1 -
Hard to say using B.W standards. I tried it once and I followed a suggestion where I picked what I could squat 10-12 reps at say RPE 5 and tried that for 20.
Not sure if there's a program around that and if so, I'm not sure what it would be trying to achieve. Fun idea though!
Good luck!0 -
Thanks folks.0
-
Not exactly my jam right now but I did a program years ago based off of Super Squats. It had the very dubious moniker of "Milk and Squats" which sounds absolutely horrific.
Seemed at the time (and still to this day) to be solidly based on bro-science with its promise of MASS!, but like you I was doing it solely as a challenge and to shake up on my regular 5x3 routine-
Anyway I searched the browser, since this piqued my interest, and here is a "mathy" answer based on "milk squats".To determine your starting weight for the 20-rep squats, take your current 5-RM and subtract 5 lbs for each scheduled workout. So, if your current 5RM is 315 lbs and you are planning to train 3x/week for 6 weeks (18 workouts), you should begin with 225 lbs. (18 workouts x 5 lbs per workout = 90 lbs). Subtracting 90 from 315 gives you 225. Attempt to add 5 lbs. to your squat every workout.
Anywho, enjoy.
0 -
Are you familiar with 5/3/1? Here is a 20 rep squat program along those lines:
https://www.t-nation.com/training/5-3-1-for-hardgainers0 -
Are you familiar with 5/3/1? Here is a 20 rep squat program along those lines:
https://www.t-nation.com/training/5-3-1-for-hardgainers
I’ve followed 531 well nowadays 531863 for 8 or 9 years now. It’s a great program
I guess what I’m really trying to gauge is my strength standard but then again I suppose it’s all relative anyway!!
0 -
I was thinking of doing this after reading an article recently! My trainer (80 years young) days he and a friend did it back in the day. It was intense but they gained strength and size.0
-
pdmatthews wrote: »I guess what I’m really trying to gauge is my strength standard but then again I suppose it’s all relative anyway!!
In that case we can do some number crunching and assuming 2x bw squat standard, 90% training max, and the third cycle at 75% are pretty grueling:
2 x .9 x .75 = 1.35
So 20 reps at 1.35x bw would be the standard.
0 -
pdmatthews wrote: »I guess what I’m really trying to gauge is my strength standard but then again I suppose it’s all relative anyway!!
In that case we can do some number crunching and assuming 2x bw squat standard, 90% training max, and the third cycle at 75% are pretty grueling:
2 x .9 x .75 = 1.35
So 20 reps at 1.35x bw would be the standard.
Perfect. Thanks. So there’s a goal to chase now.
0
Categories
- All Categories
- 1.4M Health, Wellness and Goals
- 393.4K Introduce Yourself
- 43.8K Getting Started
- 260.2K Health and Weight Loss
- 175.9K Food and Nutrition
- 47.4K Recipes
- 232.5K Fitness and Exercise
- 426 Sleep, Mindfulness and Overall Wellness
- 6.5K Goal: Maintaining Weight
- 8.5K Goal: Gaining Weight and Body Building
- 153K Motivation and Support
- 8K Challenges
- 1.3K Debate Club
- 96.3K Chit-Chat
- 2.5K Fun and Games
- 3.7K MyFitnessPal Information
- 24 News and Announcements
- 1.1K Feature Suggestions and Ideas
- 2.6K MyFitnessPal Tech Support Questions