How to record cooking oils?
TarryTaffy
Posts: 883 Member
When I saute food in ghee, there's ghee in the pan when I'm done. I don't eat it, but of course some must absorb into the food. Same with any oil/butter.
So, how do I record that? Do I add in the amount I cook with, even though I'm not ingesting most of those calories? Or, add in half?
So, how do I record that? Do I add in the amount I cook with, even though I'm not ingesting most of those calories? Or, add in half?
0
Replies
-
You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.2
-
Lillymoo01 wrote: »You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.
Hadn't thought of that, thank you. I don't have a scale but I could count Tlbs & measure when done.
Thank you, Lilly.0 -
Overthinking the issue Cal control & wt loss does not require such precision.
FWIW, I just include the cals for how much oil I added 2 the dish snd keave it st thst. If there is left over oil that u haven't ingested, this means that u will have overestimated your cals and would have sctually eaten less which mskes it more likely to facilitate your weightloss or maintenance efforts.
This is what I do and it has worked well 4 me these past 4 yrs4 -
Overthinking the issue Cal control & wt loss does not require such precision.
FWIW, I just include the cals for how much oil I added 2 the dish snd keave it st thst. If there is left over oil that u haven't ingested, this means that u will have overestimated your cals and would have sctually eaten less which mskes it more likely to facilitate your weightloss or maintenance efforts.
This is what I do and it has worked well 4 me these past 4 yrs
I know all the above & am not overthinking or worried about weight loss. Was asking a simple q.3 -
I usually count all that goes in the pan unless I see more than a tablespoon left in the pan. Then, I measure or estimate the oil to deduct at 120 calories per tbsp. Of course, meats that render out fat like bacon or burgers need to be weighed cooked not raw.1
-
If I’m cooking something where the 1cal spray oils won’t work I generally reduce the amount of oil used in the first place by around two thirds (so if a recipe calls for 1tbsp I’ll start with 1tsp.
Many times this is enough, if my food/pan starts to become dry I’ll add a splash of water or stock just to lubricate things a little. This results in no oil being ‘unaccounted’ for on the whole.
I’m not cooking meat though, and I can see how that could complicate matters if that’s rendering out too!3 -
wilson10102018 wrote: »I usually count all that goes in the pan unless I see more than a tablespoon left in the pan. Then, I measure or estimate the oil to deduct at 120 calories per tbsp. Of course, meats that render out fat like bacon or burgers need to be weighed cooked not raw.
Thank you, Wilson. Another thing I didn't think of, thank you.
I also was assuming most of the liquid in the pan was oil, but it could be meat juices.
I'm not too worried about weight... was more wondering how many calories I'm really eating & how to record it. I'll just continue to estimate.0 -
BarbaraHelen2013 wrote: »If I’m cooking something where the 1cal spray oils won’t work I generally reduce the amount of oil used in the first place by around two thirds (so if a recipe calls for 1tbsp I’ll start with 1tsp.
Many times this is enough, if my food/pan starts to become dry I’ll add a splash of water or stock just to lubricate things a little. This results in no oil being ‘unaccounted’ for on the whole.
I’m not cooking meat though, and I can see how that could complicate matters if that’s rendering out too!
Okay, that's helpful, Barbara, thank you!0 -
Specifically for myself as I'm currently loosing fat I track all of it. I am of the mindset it's better to over calculate the calories then to under calculate them and get frustrated if I am not loosing weight. Which I know I would be
That said, if I were bulking I'd only track half of it or measure what's left in the pan and subtract it from what you put into it.
So it may depend primarily what your current goals are.
At the end of the day it's an estimate of what we take in as far as calories and what we expend. It's never going to be dead on 100% of the time.
Hope this helps somewhat!4 -
TarryTaffy wrote: »Overthinking the issue Cal control & wt loss does not require such precision.
FWIW, I just include the cals for how much oil I added 2 the dish snd keave it st thst. If there is left over oil that u haven't ingested, this means that u will have overestimated your cals and would have sctually eaten less which mskes it more likely to facilitate your weightloss or maintenance efforts.
This is what I do and it has worked well 4 me these past 4 yrs
I know all the above & am not overthinking or worried about weight loss. Was asking a simple q.
Not an unexpected reponse.
You asked a simple question and I offered a simplier answer than you were looking for sndapoarently one that u (and the otherswho disagree w/me) do not care 2 cobsider
That's fine Do as you wish You are overthinking the matter as many newbies do but no point dabating that w/you.
Good luck in achieving whatever your goals may be
0 -
TarryTaffy wrote: »Lillymoo01 wrote: »You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.
Hadn't thought of that, thank you. I don't have a scale but I could count Tlbs & measure when done.
Thank you, Lilly.
Depending on what you're cooking, liquid could be released by the food and be mixed with what's left in the pan, so you won't really know how much you used.
I just count all the fat I put in the pan, but I don't deep-fry anything. Obviously, if you're deep-frying, it wouldn't make sense to count all the fat.2 -
lynn_glenmont wrote: »TarryTaffy wrote: »Lillymoo01 wrote: »You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.
Hadn't thought of that, thank you. I don't have a scale but I could count Tlbs & measure when done.
Thank you, Lilly.
Depending on what you're cooking, liquid could be released by the food and be mixed with what's left in the pan, so you won't really know how much you used.
I just count all the fat I put in the pan, but I don't deep-fry anything. Obviously, if you're deep-frying, it wouldn't make sense to count all the fat.1 -
Thank you very much for the helpful responses.
Happy New Year to you All!0 -
-
lynn_glenmont wrote: »TarryTaffy wrote: »Lillymoo01 wrote: »You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.
Hadn't thought of that, thank you. I don't have a scale but I could count Tlbs & measure when done.
Thank you, Lilly.
Depending on what you're cooking, liquid could be released by the food and be mixed with what's left in the pan, so you won't really know how much you used.
I just count all the fat I put in the pan, but I don't deep-fry anything. Obviously, if you're deep-frying, it wouldn't make sense to count all the fat.
I never thought of that which is hardly surprising because the extent of my cooking in oil is a spray in the pan before cooking and that is all included anyway.0 -
lynn_glenmont wrote: »TarryTaffy wrote: »Lillymoo01 wrote: »You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.
Hadn't thought of that, thank you. I don't have a scale but I could count Tlbs & measure when done.
Thank you, Lilly.
Depending on what you're cooking, liquid could be released by the food and be mixed with what's left in the pan, so you won't really know how much you used.
I just count all the fat I put in the pan, but I don't deep-fry anything. Obviously, if you're deep-frying, it wouldn't make sense to count all the fat.
That should say, "would not have made any sense" I hate that the edit option on MFP expires after 1 hour...2 -
lynn_glenmont wrote: »TarryTaffy wrote: »Lillymoo01 wrote: »You could always weigh what remains at the end, once it has cooled down to estimate how much was absorbed into the food.
Hadn't thought of that, thank you. I don't have a scale but I could count Tlbs & measure when done.
Thank you, Lilly.
Depending on what you're cooking, liquid could be released by the food and be mixed with what's left in the pan, so you won't really know how much you used.
I just count all the fat I put in the pan, but I don't deep-fry anything. Obviously, if you're deep-frying, it wouldn't make sense to count all the fat.
That should say, "would not have made any sense" I hate that the edit option on MFP expires after 1 hour...
Lol. I've done it, too. No worries, your point was understood either way.0
Categories
- All Categories
- 1.4M Health, Wellness and Goals
- 393.3K Introduce Yourself
- 43.8K Getting Started
- 260.2K Health and Weight Loss
- 175.9K Food and Nutrition
- 47.4K Recipes
- 232.5K Fitness and Exercise
- 422 Sleep, Mindfulness and Overall Wellness
- 6.5K Goal: Maintaining Weight
- 8.5K Goal: Gaining Weight and Body Building
- 153K Motivation and Support
- 8K Challenges
- 1.3K Debate Club
- 96.3K Chit-Chat
- 2.5K Fun and Games
- 3.7K MyFitnessPal Information
- 23 News and Announcements
- 1.1K Feature Suggestions and Ideas
- 2.6K MyFitnessPal Tech Support Questions