New, Old, and Confused. Warning: May get to be long post

2»

Replies

  • Luke_rabbit
    Luke_rabbit Posts: 1,031 Member
    lemurcat2 wrote: »
    NovusDies wrote: »
    Scanning bar codes cannot be trusted. Neither can eyeballed portions, half pieces of fruit, or measuring cups used for solid foods (like cheerios).

    To log accurately you really need a food scale. Measure all solid food in grams and find a suitable MFP database entry to match it. All entries you pick need to be personally verified by you the first time you use them. This means comparing the item to the label or to the new USDA site.

    Some commonly missed things are beverages or things added to beverages, condiments, oil, cooking spray, and supplements. Supplements may seem ridiculous but they can have calories and they can add up.

    Why is scanning bar codes not reliable? If I have a protein bar or a package of something I usually scan the barcode. The package is the portion. I also scan the barcode for other items, like bread or pita. I do try to weigh items as much as possible. How can you log cooking spray?

    Because it's not information from the manufacturer, but like other entries inputted by some other MFP user. Check with your package information to make sure it matches up.

    Some would recommend weighing single serving foods, but I never did and lost fine (admittedly I ate relatively few of them).

    Cooking spray has cals, you can just estimate something like 0.1 of a tbsp if not a super long spray (that's 10 cal or so rather than the likely around 5 or less if you actually spray as short as recommended, but I suspect most don't). If you really coat the pan or veg, I'd estimate higher.

    Another reason that barcode scanning can be inaccurate is that recipes change, but barcodes remain the same. If the manufacturer has increased or decreased the size, the older entry in MFP will now be incorrect.

    This has been especially true recently in the US because the labels are being updated. Serving sizes are changing plus manufacturers are getting more accurate nutrition facts.

    For example, my favorite quick meals are frozen items made by Sweet Earth. Every time I get one with a new label something is changed on it besides the important addition of potassium info. The calories might be new, or the protein, or fat, or something else, or several different things.
  • AnnPT77
    AnnPT77 Posts: 34,090 Member
    NovusDies wrote: »
    Scanning bar codes cannot be trusted. Neither can eyeballed portions, half pieces of fruit, or measuring cups used for solid foods (like cheerios).

    To log accurately you really need a food scale. Measure all solid food in grams and find a suitable MFP database entry to match it. All entries you pick need to be personally verified by you the first time you use them. This means comparing the item to the label or to the new USDA site.

    Some commonly missed things are beverages or things added to beverages, condiments, oil, cooking spray, and supplements. Supplements may seem ridiculous but they can have calories and they can add up.

    Why is scanning bar codes not reliable? If I have a protein bar or a package of something I usually scan the barcode. The package is the portion. I also scan the barcode for other items, like bread or pita. I do try to weigh items as much as possible. How can you log cooking spray?

    Can on scale, zero scale. Spray. Can back on scale. Negative reading = amount of oil used. Log as that type of oil

    None of which is required for Blooie, IMO, as calories aren't her core issue, and it's usually not much oil.
  • rheddmobile
    rheddmobile Posts: 6,840 Member
    lemurcat2 wrote: »
    NovusDies wrote: »
    Scanning bar codes cannot be trusted. Neither can eyeballed portions, half pieces of fruit, or measuring cups used for solid foods (like cheerios).

    To log accurately you really need a food scale. Measure all solid food in grams and find a suitable MFP database entry to match it. All entries you pick need to be personally verified by you the first time you use them. This means comparing the item to the label or to the new USDA site.

    Some commonly missed things are beverages or things added to beverages, condiments, oil, cooking spray, and supplements. Supplements may seem ridiculous but they can have calories and they can add up.

    Why is scanning bar codes not reliable? If I have a protein bar or a package of something I usually scan the barcode. The package is the portion. I also scan the barcode for other items, like bread or pita. I do try to weigh items as much as possible. How can you log cooking spray?

    Because it's not information from the manufacturer, but like other entries inputted by some other MFP user. Check with your package information to make sure it matches up.

    Some would recommend weighing single serving foods, but I never did and lost fine (admittedly I ate relatively few of them).

    Cooking spray has cals, you can just estimate something like 0.1 of a tbsp if not a super long spray (that's 10 cal or so rather than the likely around 5 or less if you actually spray as short as recommended, but I suspect most don't). If you really coat the pan or veg, I'd estimate higher.

    I feel like if you’re using cooking spray as suggested it’s not really enough calories to have a big impact - but some people read the label which says 4 calories or whatever and think, “This stuff has no calories! I can use this instead of salad dressing!” and proceed to spray half a can of extra virgin olive oil all over their salad and log it as 4 calories.
  • lemurcat2
    lemurcat2 Posts: 7,885 Member
    lemurcat2 wrote: »
    NovusDies wrote: »
    Scanning bar codes cannot be trusted. Neither can eyeballed portions, half pieces of fruit, or measuring cups used for solid foods (like cheerios).

    To log accurately you really need a food scale. Measure all solid food in grams and find a suitable MFP database entry to match it. All entries you pick need to be personally verified by you the first time you use them. This means comparing the item to the label or to the new USDA site.

    Some commonly missed things are beverages or things added to beverages, condiments, oil, cooking spray, and supplements. Supplements may seem ridiculous but they can have calories and they can add up.

    Why is scanning bar codes not reliable? If I have a protein bar or a package of something I usually scan the barcode. The package is the portion. I also scan the barcode for other items, like bread or pita. I do try to weigh items as much as possible. How can you log cooking spray?

    Because it's not information from the manufacturer, but like other entries inputted by some other MFP user. Check with your package information to make sure it matches up.

    Some would recommend weighing single serving foods, but I never did and lost fine (admittedly I ate relatively few of them).

    Cooking spray has cals, you can just estimate something like 0.1 of a tbsp if not a super long spray (that's 10 cal or so rather than the likely around 5 or less if you actually spray as short as recommended, but I suspect most don't). If you really coat the pan or veg, I'd estimate higher.

    I feel like if you’re using cooking spray as suggested it’s not really enough calories to have a big impact - but some people read the label which says 4 calories or whatever and think, “This stuff has no calories! I can use this instead of salad dressing!” and proceed to spray half a can of extra virgin olive oil all over their salad and log it as 4 calories.

    Yeah, I agree. I mostly don't use cooking spray anyway but when I do I tend to be nitpicky and log it, even though I don't log, say, black coffee or a little mustard. But I admit that's not logical.

    I do think it's not a bad habit to get into since I've seen lots of people here say they assumed it had no cals (even though I'm not sure how that's possible) and were using an insane amount and logging nothing. Logging should make someone realize they need to watch the sprays or account for the longer ones.
  • AnnPT77
    AnnPT77 Posts: 34,090 Member
    lemurcat2 wrote: »
    lemurcat2 wrote: »
    NovusDies wrote: »
    Scanning bar codes cannot be trusted. Neither can eyeballed portions, half pieces of fruit, or measuring cups used for solid foods (like cheerios).

    To log accurately you really need a food scale. Measure all solid food in grams and find a suitable MFP database entry to match it. All entries you pick need to be personally verified by you the first time you use them. This means comparing the item to the label or to the new USDA site.

    Some commonly missed things are beverages or things added to beverages, condiments, oil, cooking spray, and supplements. Supplements may seem ridiculous but they can have calories and they can add up.

    Why is scanning bar codes not reliable? If I have a protein bar or a package of something I usually scan the barcode. The package is the portion. I also scan the barcode for other items, like bread or pita. I do try to weigh items as much as possible. How can you log cooking spray?

    Because it's not information from the manufacturer, but like other entries inputted by some other MFP user. Check with your package information to make sure it matches up.

    Some would recommend weighing single serving foods, but I never did and lost fine (admittedly I ate relatively few of them).

    Cooking spray has cals, you can just estimate something like 0.1 of a tbsp if not a super long spray (that's 10 cal or so rather than the likely around 5 or less if you actually spray as short as recommended, but I suspect most don't). If you really coat the pan or veg, I'd estimate higher.

    I feel like if you’re using cooking spray as suggested it’s not really enough calories to have a big impact - but some people read the label which says 4 calories or whatever and think, “This stuff has no calories! I can use this instead of salad dressing!” and proceed to spray half a can of extra virgin olive oil all over their salad and log it as 4 calories.

    Yeah, I agree. I mostly don't use cooking spray anyway but when I do I tend to be nitpicky and log it, even though I don't log, say, black coffee or a little mustard. But I admit that's not logical.

    I do think it's not a bad habit to get into since I've seen lots of people here say they assumed it had no cals (even though I'm not sure how that's possible) and were using an insane amount and logging nothing. Logging should make someone realize they need to watch the sprays or account for the longer ones.

    Some are labeled 0 calories (but for a 1/3 second spray). I think that's where the delusion begins. I agree that common sense ought to override, though.

    Because I'm lazy, I sometimes use spray on veg for roasting, where I also think I get better coverage with less oil; and almost always when making something savory with filo leaves, because it's so much faster than brushing butter. Either case, that's a material number of oil calories.
  • csplatt
    csplatt Posts: 1,200 Member
    edited January 2020
    Is the amount of calories you are currently consuming the same you've been consuming for the last several years when you've maintained at 151-155? Or are you currently eating significantly less because of some of your health challenges? I only ask because if it's not a new way of eating, then you maintained that weight for a reason -- it was enough to sustain you and you didn't lose drastic amounts of weight. Which just means you're eating a tad more than you think. No big deal!
  • PAV8888
    PAV8888 Posts: 14,206 Member
    So because some of these things are relatively half important.

    If I read this correctly between September and December 2019, in other words in approximately 4 months of eating like you're doing now, you reduced your average weight by approximately 13 to 18 pounds.

    And it was during the tail end of that time period that you found high protein in your urine in your labs, and this was tested a second time and confirmed since you got an appointment to a nephrologist?

    One question I would want to ask given that it doesn't sound to me like you were eating a lot of protein or calories based in your food intake description is whether any of them think the sequence of events may have influenced your labs
  • PAV8888
    PAV8888 Posts: 14,206 Member
    Sounds like you've got things as well in hand as anyone could. Definitely not advocating high protein with kidney problems. My question was whether it appeared during the tail end of weight loss; but clearly it was in October, so early stages of your return to normal weight, and clearly your doctor and you have reasons to believe that this is not an issue that just started. So all I can do is wish, most sincerely, that the diagnosis ends up being better and easier to control than you fear.
  • Fuzzipeg
    Fuzzipeg Posts: 2,301 Member
    I'm sure you do have Linda's courage, apples do not fall far from the tree. Linda had you, sisters are great supports, sometimes more than husbands, they have known us longer. May be she would tell you, your are counting your chickens before their hatched or jumping fences before you get to them. I'm the worlds best at becoming stressed, fearing what I may be told is the worst possible. What happened to Linda does not have to be what is in store for you. I'm sure its the waiting getting to you, patience is not my best virtue either, knowing something yesterday is always better than tomorrow.

    One thought on meals. Might the recipe function help. If you could represent some of your regular "go to"meals as recipes then you could allocate the approximate amount you have one day and then the leftovers the next, the calories would even out over the two days. You can use the function many times.

    When it comes to how we title meals, I think you can change the titles on offer to something to suit yourselves making it way better for you, (can't remember how) Then as you accumulate the full range of individual food items you eat on your food log, the easier it will become to build up the shape of your day in foods no matter how small the amount your consume. I'm sure you can make the system work for you. I'm asuming you are using the guided set up at the moment. You may eventually find benefits in the personalised option.

    Wishing you well for Friday. Take care.
  • lemurcat2
    lemurcat2 Posts: 7,885 Member
    blooie1 wrote: »
    I guess I have 6 days until I get definitive answers. I’m scared. I don’t have my sister Linda’s courage. But I want to be well prepared as well. That’s where MFP and all of you come in.

    I think all we can do now is try to be supportive (and it sounds like that's what you are looking for). I hope you get a good and helpful answer, and having the logs to show your medical team will likely be a place to start for any nutritional alterations.
  • maureenkhilde
    maureenkhilde Posts: 849 Member
    blooie1, my simple thoughts. Keep doing what you are doing. Use MFP to log all of your foods. Then print it all out to take with you to your Dr. appointment. Also you may want to make sure to print out the reports part as well, because that will show based on your food logs the breakdown for carbs, fat, protein, sodium, sugar or what you change it to.

    Most kidney specialists if in a clinic seem to have dieticians on staff. Because I am pretty sure you will be getting a very specific diet meal plan to follow. Along with precise liquid intake allowances. And this is where I think it will be great if they will really take into consideration what you are already doing, so they can see where the adjustments need to be made.

    Let staff know you have a food scale so you can be very accurate in your measurements of foods ongoing.

    I would not suggest making any changes to exercise or diet until you have the go ahead as to what they think is best.

    Wishing you the best, and once you know your exact reccommendations then folks here can assist a bit better.
  • robingmurphy
    robingmurphy Posts: 349 Member
    Since you have different needs and want to pay attention to micronutrients like potassium, you might want to consider using a tool like Cronometer https://cronometer.com/
  • kpk54
    kpk54 Posts: 4,474 Member
    Since you have different needs and want to pay attention to micronutrients like potassium, you might want to consider using a tool like Cronometer https://cronometer.com/

    This.
  • ahoy_m8
    ahoy_m8 Posts: 3,053 Member
    Also, nutritiondata.com isn’t set up as conveniently as MFP, but it does provide all micronutrients, and it’s database is not user sourced (all entries are “verified”).

    Go Duke!
  • Diatonic12
    Diatonic12 Posts: 32,344 Member
    @blooie1 How's it going. Wondering how you're getting along. <3
  • Fuzzipeg
    Fuzzipeg Posts: 2,301 Member
    It looks as if @blooie1, has not been here since the 27th. Like you Diatonic12, I wish @blooie well.

    We are thinking of you @blooie1 .