Best 3 lifts?

1246713

Replies

  • aelunyu
    aelunyu Posts: 486 Member
    psuLemon wrote: »
    rasalmihir wrote: »
    Damn, this thread makes me feel so weak. Great numbers y'all! I have never tried 1RMs, but these are my highest numbers during regular sets.

    Squat - 172lbs/ 68kg (x15)
    Bench - 140lbs/ 56kg (x10)
    Deadlift - 185lbs/ 74kg (x10)

    I'm 138pounds and 6'0" tall. I know, skinny AF and I need to up my game. Been working out for 2 years with a lot of gaps.

    If you want to feel strong, stop doing crazy amount of reps. Work closer to the 4-6 rep range and the increases in strength will occur much faster.

    Also, why are we bothering with really weird tiny plates? Haha, I'm sure there's some method to the madness but considering your volume, I don't think it's worth to time to scrouge up 1kg or 2.5lb discs in the gym.
  • psuLemon
    psuLemon Posts: 38,427 MFP Moderator
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Did you read that i said for fun? I know they are not accurate.

    And why would my numbers matter? Knowledge isnt directly correlated with how much you lift. Look at Lyle McDonald.

    Since you added to your comment i'll address that as well. Are you comparing yourself to Lyle Mcdonald? Anything physical requires much trial and error to achieve your goals. Nobody usually jumps on a compound movement and naturally has great form without hours of practice and failure. Never should you take advice from people who read a few articles and regurgitate what they read without actually experiencing it.

    No, i am not. I do not have the experience or qualifications of him. And i know it was accurate.

    So at what weight do i nees to lifr before i can offer valid advice? Do i get any additional for things like the severe tendinitis in both my forearms and wrist? How about the arthritis building up in my shoulders? Maybe the sciatica issues i have dealt with.

    Knowledge does come with experience. But being able to lift big doesn't mean you are knowledgeable. It can mean you had a good teacher of form and a solid plan. It also might mean that you did that and combine with enhancers to get you there.

    So if you want to judge me, fine but do it on my knowledge, not how much i lift.

    Strength comes with experience and knowledge. Ask any power lifter out there and they will tell you how they have learned so much from their injuries that have happened over time and how they have adapted (tweaking technique, routines, weight, therapy etc). As to your injuries, I can tell that you probably practiced incorrect form and developed some bad habits. Me personally I have had my share of injuries, but I corrected them all and have zero pain in my body at the moment. Also, i believe I did judge you on your knowledge. Any beginner should spend as much time as possible learning proper technique versus jumping straight into power lifting routines, which lead to a list of injuries due to under development. Yes I am all about moving big weight, but I am more concerned about practicing proper technique over anything. I never said you cant offer advice i'm just making it clear to people that you need to take people with little experience recommendations with a grain of salt.

    Hate break it to you but my injuries came well before my lifting career. But nice assumption.
  • vinceno21
    vinceno21 Posts: 32 Member
    edited February 2017
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Did you read that i said for fun? I know they are not accurate.

    And why would my numbers matter? Knowledge isnt directly correlated with how much you lift. Look at Lyle McDonald.

    Since you added to your comment i'll address that as well. Are you comparing yourself to Lyle Mcdonald? Anything physical requires much trial and error to achieve your goals. Nobody usually jumps on a compound movement and naturally has great form without hours of practice and failure. Never should you take advice from people who read a few articles and regurgitate what they read without actually experiencing it.

    No, i am not. I do not have the experience or qualifications of him. And i know it was accurate.

    So at what weight do i nees to lifr before i can offer valid advice? Do i get any additional for things like the severe tendinitis in both my forearms and wrist? How about the arthritis building up in my shoulders? Maybe the sciatica issues i have dealt with.

    Knowledge does come with experience. But being able to lift big doesn't mean you are knowledgeable. It can mean you had a good teacher of form and a solid plan. It also might mean that you did that and combine with enhancers to get you there.

    So if you want to judge me, fine but do it on my knowledge, not how much i lift.

    Strength comes with experience and knowledge. Ask any power lifter out there and they will tell you how they have learned so much from their injuries that have happened over time and how they have adapted (tweaking technique, routines, weight, therapy etc). As to your injuries, I can tell that you probably practiced incorrect form and developed some bad habits. Me personally I have had my share of injuries, but I corrected them all and have zero pain in my body at the moment. Also, i believe I did judge you on your knowledge. Any beginner should spend as much time as possible learning proper technique versus jumping straight into power lifting routines, which lead to a list of injuries due to under development. Yes I am all about moving big weight, but I am more concerned about practicing proper technique over anything. I never said you cant offer advice i'm just making it clear to people that you need to take people with little experience recommendations with a grain of salt.

    Hate break it to you but my injuries came well before my lifting career. But nice assumption.

    Hate to break it to you but its not an assumption when we are on the topic of lifting weights and you talk about injuries in the middle of your argument in regards to the discussion. Any normal person would correlate that to the discussion. Be more clear if you choose to disagree. If we are talking about heavy weights and you bring up your injuries in the middle of your comment most would think those were caused by a movement.
  • psuLemon
    psuLemon Posts: 38,427 MFP Moderator
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Did you read that i said for fun? I know they are not accurate.

    And why would my numbers matter? Knowledge isnt directly correlated with how much you lift. Look at Lyle McDonald.

    Since you added to your comment i'll address that as well. Are you comparing yourself to Lyle Mcdonald? Anything physical requires much trial and error to achieve your goals. Nobody usually jumps on a compound movement and naturally has great form without hours of practice and failure. Never should you take advice from people who read a few articles and regurgitate what they read without actually experiencing it.

    No, i am not. I do not have the experience or qualifications of him. And i know it was accurate.

    So at what weight do i nees to lifr before i can offer valid advice? Do i get any additional for things like the severe tendinitis in both my forearms and wrist? How about the arthritis building up in my shoulders? Maybe the sciatica issues i have dealt with.

    Knowledge does come with experience. But being able to lift big doesn't mean you are knowledgeable. It can mean you had a good teacher of form and a solid plan. It also might mean that you did that and combine with enhancers to get you there.

    So if you want to judge me, fine but do it on my knowledge, not how much i lift.

    Strength comes with experience and knowledge. Ask any power lifter out there and they will tell you how they have learned so much from their injuries that have happened over time and how they have adapted (tweaking technique, routines, weight, therapy etc). As to your injuries, I can tell that you probably practiced incorrect form and developed some bad habits. Me personally I have had my share of injuries, but I corrected them all and have zero pain in my body at the moment. Also, i believe I did judge you on your knowledge. Any beginner should spend as much time as possible learning proper technique versus jumping straight into power lifting routines, which lead to a list of injuries due to under development. Yes I am all about moving big weight, but I am more concerned about practicing proper technique over anything. I never said you cant offer advice i'm just making it clear to people that you need to take people with little experience recommendations with a grain of salt.

    Hate break it to you but my injuries came well before my lifting career. But nice assumption.

    Hate to break it to you but its not an assumption when we are on the topic of lifting weights and you talk about injuries in the middle of your argument in regards to the discussion. Any normal person would correlate that to the discussion.

    Novel concept but you could ask questions prior to commenting. Then you can make an actual informed argument.
  • vinceno21
    vinceno21 Posts: 32 Member
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Did you read that i said for fun? I know they are not accurate.

    And why would my numbers matter? Knowledge isnt directly correlated with how much you lift. Look at Lyle McDonald.

    Since you added to your comment i'll address that as well. Are you comparing yourself to Lyle Mcdonald? Anything physical requires much trial and error to achieve your goals. Nobody usually jumps on a compound movement and naturally has great form without hours of practice and failure. Never should you take advice from people who read a few articles and regurgitate what they read without actually experiencing it.

    No, i am not. I do not have the experience or qualifications of him. And i know it was accurate.

    So at what weight do i nees to lifr before i can offer valid advice? Do i get any additional for things like the severe tendinitis in both my forearms and wrist? How about the arthritis building up in my shoulders? Maybe the sciatica issues i have dealt with.

    Knowledge does come with experience. But being able to lift big doesn't mean you are knowledgeable. It can mean you had a good teacher of form and a solid plan. It also might mean that you did that and combine with enhancers to get you there.

    So if you want to judge me, fine but do it on my knowledge, not how much i lift.

    Strength comes with experience and knowledge. Ask any power lifter out there and they will tell you how they have learned so much from their injuries that have happened over time and how they have adapted (tweaking technique, routines, weight, therapy etc). As to your injuries, I can tell that you probably practiced incorrect form and developed some bad habits. Me personally I have had my share of injuries, but I corrected them all and have zero pain in my body at the moment. Also, i believe I did judge you on your knowledge. Any beginner should spend as much time as possible learning proper technique versus jumping straight into power lifting routines, which lead to a list of injuries due to under development. Yes I am all about moving big weight, but I am more concerned about practicing proper technique over anything. I never said you cant offer advice i'm just making it clear to people that you need to take people with little experience recommendations with a grain of salt.

    Hate break it to you but my injuries came well before my lifting career. But nice assumption.

    Hate to break it to you but its not an assumption when we are on the topic of lifting weights and you talk about injuries in the middle of your argument in regards to the discussion. Any normal person would correlate that to the discussion.

    Novel concept but you could ask questions prior to commenting. Then you can make an actual informed argument.

    An easier solution would be to stay relevant and don't go off topic. If you choose to go off topic then you need to be more clear. How can you prove any points if you're not actually explaining yourself properly? If you told us that you have injuries from things outside of weight lifting then I would have probably stopped commenting long ago.
  • richln
    richln Posts: 809 Member
    aelunyu wrote: »
    psuLemon wrote: »
    rasalmihir wrote: »
    Damn, this thread makes me feel so weak. Great numbers y'all! I have never tried 1RMs, but these are my highest numbers during regular sets.

    Squat - 172lbs/ 68kg (x15)
    Bench - 140lbs/ 56kg (x10)
    Deadlift - 185lbs/ 74kg (x10)

    I'm 138pounds and 6'0" tall. I know, skinny AF and I need to up my game. Been working out for 2 years with a lot of gaps.

    If you want to feel strong, stop doing crazy amount of reps. Work closer to the 4-6 rep range and the increases in strength will occur much faster.

    Also, why are we bothering with really weird tiny plates? Haha, I'm sure there's some method to the madness but considering your volume, I don't think it's worth to time to scrouge up 1kg or 2.5lb discs in the gym.

    y u no like cookies?
  • not_a_runner
    not_a_runner Posts: 1,343 Member
    vinceno21 wrote: »
    vinceno21 wrote: »
    vinceno21 wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    This wasn't the only poster to mention using a 1RM calculator.
    Are we going to call everyone else out as well or is your beef personal?

    How about you read the thread before jumping to conclusions. I called him out because he was telling a noob to start going heavier and cut down the reps. MY POINT IS WHO CARES ABOUT WEIGHT WHEN YOU STILL HAVENT LEARNED THE MOVEMENT PROPERLY!!!

    So he's doing the movement improperly because he's not stronger than he is? Or? How are you to know that he's doing it improperly based on his # s and comments here?

    Ok cool no need to pry at the discussion. Thanks

    Lol last I checked this was a public forum and the point is for the public to engage in discussion with others. Just like you felt the need to pry at the discussion that didn't involve you. :)

    You clearly want to argue and I don't care to argue with you at all. You're not asking anything different from the last guys posts so I don't see the need to engage with someone who is trying to make me look like the bad guy lol.

    The "last guys posts" were not there when I was writing my comment.
    Apparently the way I phrased it was just looking for an argument though. Ok.

  • aelunyu
    aelunyu Posts: 486 Member
    SideSteel wrote: »
    aelunyu wrote: »
    psuLemon wrote: »
    rasalmihir wrote: »
    Damn, this thread makes me feel so weak. Great numbers y'all! I have never tried 1RMs, but these are my highest numbers during regular sets.

    Squat - 172lbs/ 68kg (x15)
    Bench - 140lbs/ 56kg (x10)
    Deadlift - 185lbs/ 74kg (x10)

    I'm 138pounds and 6'0" tall. I know, skinny AF and I need to up my game. Been working out for 2 years with a lot of gaps.

    If you want to feel strong, stop doing crazy amount of reps. Work closer to the 4-6 rep range and the increases in strength will occur much faster.

    Also, why are we bothering with really weird tiny plates? Haha, I'm sure there's some method to the madness but considering your volume, I don't think it's worth to time to scrouge up 1kg or 2.5lb discs in the gym.

    Actually it would make more sense at higher volumes since making a five or 10 pound jump on a set of 15 reps is a lot more challenging than making a five or 10 pound jump on a set of four.

    Maybe I'm missing something. It's harder of course but the numbers seem arbitrary, and hard to achieve with regular gym weights...either kilo or lb. My point was maybe to just do 175/145/185 for the same reps. We're not talking about 10 to 15 here....
  • bbell1985
    bbell1985 Posts: 4,571 Member
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.
  • SideSteel
    SideSteel Posts: 11,068 Member
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    Guarantee you get these.
  • bbell1985
    bbell1985 Posts: 4,571 Member
    SideSteel wrote: »
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    Guarantee you get these.

    and bench the bar
  • SideSteel
    SideSteel Posts: 11,068 Member
    bbell1985 wrote: »
    SideSteel wrote: »
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    Guarantee you get these.

    and bench the bar

    Then you'll be all mad like kitten this kitten kitten in the kitten
  • bbell1985
    bbell1985 Posts: 4,571 Member
    SideSteel wrote: »
    bbell1985 wrote: »
    SideSteel wrote: »
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    Guarantee you get these.

    and bench the bar

    Then you'll be all mad like kitten this kitten kitten in the kitten

    I'm trying to piece this awesomeness together.
  • psuLemon
    psuLemon Posts: 38,427 MFP Moderator
    bbell1985 wrote: »
    SideSteel wrote: »
    bbell1985 wrote: »
    SideSteel wrote: »
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    Guarantee you get these.

    and bench the bar

    Then you'll be all mad like kitten this kitten kitten in the kitten

    I'm trying to piece this awesomeness together.

    Come on meow, you know it.
  • bbell1985
    bbell1985 Posts: 4,571 Member
    psuLemon wrote: »
    bbell1985 wrote: »
    SideSteel wrote: »
    bbell1985 wrote: »
    SideSteel wrote: »
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    Guarantee you get these.

    and bench the bar

    Then you'll be all mad like kitten this kitten kitten in the kitten

    I'm trying to piece this awesomeness together.

    Come on meow, you know it.

    bahahahaha good one lemony
  • Chieflrg
    Chieflrg Posts: 9,097 Member
    edited February 2017
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Did you read that i said for fun? I know they are not accurate.

    And why would my numbers matter? Knowledge isnt directly correlated with how much you lift. Look at Lyle McDonald.

    Since you added to your comment i'll address that as well. Are you comparing yourself to Lyle Mcdonald? Anything physical requires much trial and error to achieve your goals. Nobody usually jumps on a compound movement and naturally has great form without hours of practice and failure. Never should you take advice from people who read a few articles and regurgitate what they read without actually experiencing it.

    No, i am not. I do not have the experience or qualifications of him. And i know it was accurate.

    So at what weight do i nees to lifr before i can offer valid advice? Do i get any additional for things like the severe tendinitis in both my forearms and wrist? How about the arthritis building up in my shoulders? Maybe the sciatica issues i have dealt with.

    Knowledge does come with experience. But being able to lift big doesn't mean you are knowledgeable. It can mean you had a good teacher of form and a solid plan. It also might mean that you did that and combine with enhancers to get you there.

    So if you want to judge me, fine but do it on my knowledge, not how much i lift.

    Strength comes with experience and knowledge. Ask any power lifter out there and they will tell you how they have learned so much from their injuries that have happened over time and how they have adapted (tweaking technique, routines, weight, therapy etc). As to your injuries, I can tell that you probably practiced incorrect form and developed some bad habits. Me personally I have had my share of injuries, but I corrected them all and have zero pain in my body at the moment. Also, i believe I did judge you on your knowledge. Any beginner should spend as much time as possible learning proper technique versus jumping straight into power lifting routines, which lead to a list of injuries due to under development. Yes I am all about moving big weight, but I am more concerned about practicing proper technique over anything. I never said you cant offer advice i'm just making it clear to people that you need to take people with little experience recommendations with a grain of salt.

    Hate break it to you but my injuries came well before my lifting career. But nice assumption.

    Hate to break it to you but its not an assumption when we are on the topic of lifting weights and you talk about injuries in the middle of your argument in regards to the discussion. Any normal person would correlate that to the discussion. Be more clear if you choose to disagree. If we are talking about heavy weights and you bring up your injuries in the middle of your comment most would think those were caused by a movement.

    Or for some of older folks we might think it's a pre existing injury that has nothing to do with lifting that will always give us problems or even an common autoimmune disease that causes those type of injuries because life happens.
  • nooneyuk88
    nooneyuk88 Posts: 19 Member
    This page got saltier than a pack of salty nuts that have spent a day floating in the Dead Sea before being ground into a pretzel at universal.

    In an attempt to get back on Track I pb'd my 1 Rep Maxs on Monday

    110 kg dead
    65kg squat
    55kg bench

    @ 64 kg

  • Gallowmere1984
    Gallowmere1984 Posts: 6,626 Member
    edited February 2017
    bbell1985 wrote: »
    Are we still talking numbers here?
    Recent PRs
    Squat 240
    Deadlift 290
    Bench...bench is stupid.

    I'm hoping for a 250 squat and 300 DL by the end of March.

    I have to agree with you in bench. Nothing is less awesome under the iron, than plopping ones *kitten* on a fluffy bench or seat to do something. Standing overhead work ftw.
  • watts6151
    watts6151 Posts: 905 Member
    Current lifts

    Dead 606 lb
    Squat 593 lb
    Bench 330 lb

  • tross0924
    tross0924 Posts: 909 Member
    vinceno21 wrote: »
    tross0924 wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Squat - 525
    Deads - 600
    Bench - 375

    Dude, you should get your numbers way up before you throw shade at other people for their numbers.

    Listen, I never threw the guy shade for his numbers ok? I'm not one to say oh you're weak so don't speak. That type of mentality is such a waste. I was telling him that if you're a beginner you shouldn't jump straight into powerlifting routines if you don't even have the basics down. Also, it seems like you are a bit hypocritical by sying dont throw someone shade about their numbers then say I should get mine up. Great job you're strong and you also have been lifting for 10 more years than I have lol.

    Wow! You really do assume a lot of things! And you don't even see them as assumptions.

    How long has psuLemon been lifting?
    How did he get injured? (I laughed at this one cause you said "I didn't assume anything I just took information that wasn't there and fit it in with what we were talking about and acted like that was fact.")
    How much experience does he have?
    How long have I been lifting? (Hint it's not 10 years total let alone 10 years longer than you, and yes I'm assuming you've lifted at least one day)
    How's my form? (Have you seen me squat or are you assuming that because I can move a lot of weight I must know what I'm talking about)

    Also it seems like your sarcasm detector is broken . . .
  • vinceno21
    vinceno21 Posts: 32 Member
    edited February 2017
    tross0924 wrote: »
    vinceno21 wrote: »
    tross0924 wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Squat - 525
    Deads - 600
    Bench - 375

    Dude, you should get your numbers way up before you throw shade at other people for their numbers.

    Listen, I never threw the guy shade for his numbers ok? I'm not one to say oh you're weak so don't speak. That type of mentality is such a waste. I was telling him that if you're a beginner you shouldn't jump straight into powerlifting routines if you don't even have the basics down. Also, it seems like you are a bit hypocritical by sying dont throw someone shade about their numbers then say I should get mine up. Great job you're strong and you also have been lifting for 10 more years than I have lol.

    Wow! You really do assume a lot of things! And you don't even see them as assumptions.

    How long has psuLemon been lifting?
    How did he get injured? (I laughed at this one cause you said "I didn't assume anything I just took information that wasn't there and fit it in with what we were talking about and acted like that was fact.")
    How much experience does he have?
    How long have I been lifting? (Hint it's not 10 years total let alone 10 years longer than you, and yes I'm assuming you've lifted at least one day)
    How's my form? (Have you seen me squat or are you assuming that because I can move a lot of weight I must know what I'm talking about)

    Also it seems like your sarcasm detector is broken . . .

    Basically you were being hypocritical telling me not to give someone a hard time about their numbers but you did the exact same thing to me. You're like 14 years older than me and have easily been working out a lot longer than I have lol. I really don't care but you're missing the point completely. This all started by me telling a beginner to not worry about moving heavy weight and to practice his technique. No need for your petty comments. Also, yea I would definitely assume and hope you have great form with numbers like that. Would you say I'm wrong about that and that you have no clue about what you're doing? And for the record I just got into power lifting like a year and a half ago so my numbers will be going way past where they currently are now. I started off bodybuilding for a few years and decided to bulk up and power lift a lot more frequently. Just because someone is a moderator doesn't mean you need to cook up some random comment that's not relevant at all to the discussion. I have nothing against psulemon and appreciate his opinion and this discussion.

  • psuLemon
    psuLemon Posts: 38,427 MFP Moderator
    edited February 2017
    vinceno21 wrote: »
    tross0924 wrote: »
    vinceno21 wrote: »
    tross0924 wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Squat - 525
    Deads - 600
    Bench - 375

    Dude, you should get your numbers way up before you throw shade at other people for their numbers.

    Listen, I never threw the guy shade for his numbers ok? I'm not one to say oh you're weak so don't speak. That type of mentality is such a waste. I was telling him that if you're a beginner you shouldn't jump straight into powerlifting routines if you don't even have the basics down. Also, it seems like you are a bit hypocritical by sying dont throw someone shade about their numbers then say I should get mine up. Great job you're strong and you also have been lifting for 10 more years than I have lol.

    Wow! You really do assume a lot of things! And you don't even see them as assumptions.

    How long has psuLemon been lifting?
    How did he get injured? (I laughed at this one cause you said "I didn't assume anything I just took information that wasn't there and fit it in with what we were talking about and acted like that was fact.")
    How much experience does he have?
    How long have I been lifting? (Hint it's not 10 years total let alone 10 years longer than you, and yes I'm assuming you've lifted at least one day)
    How's my form? (Have you seen me squat or are you assuming that because I can move a lot of weight I must know what I'm talking about)

    Also it seems like your sarcasm detector is broken . . .

    Basically you were being hypocritical telling me not to give someone a hard time about their numbers but you did the exact same thing to me. You're like 14 years older than me and have easily been working out a lot longer than I have lol. I really don't care but you're missing the point completely. This all started by me telling a beginner to not worry about moving heavy weight and to practice his technique. No need for your petty comments. Also, yea I would definitely assume and hope you have great form with numbers like that. Would you say I'm wrong about that and that you have no clue about what you're doing? And for the record I just got into power lifting like a year and a half ago so my numbers will be going way past where they currently are now. I started off bodybuilding for a few years and decided to bulk up and power lift a lot more frequently. Just because someone is a moderator doesn't mean you need to cook up some random comment that's not relevant at all to the discussion. I have nothing against psulemon and appreciate his opinion and this discussion.

    So we can get back on track, let me say one last things and we can let this drop. When I made that suggested to that person, it wasn't a means to modify their programming because before you go down that road you need to understand all the variables. I made the comment because you can't adequately compare ones weight x 10/15 reps vs most people's 1RM or 3RM. I was simple stating, that if they wanted a comparable number, that they should go to the gym (pending they have good form) and try a 1RM or 3RM. That is what I did 5 weeks ago when I started the program (of which I have surpassed all my tested 1RMs). This way, if the person didn't want to feel weak or was curious on how they compared, they could make an apples to apples comparison.

    This largely was extremely overblown and way too many assumptions were made. So let's just move on. It's really not worth my time or the time of anyone else.
  • vinceno21
    vinceno21 Posts: 32 Member
    psuLemon wrote: »
    vinceno21 wrote: »
    tross0924 wrote: »
    vinceno21 wrote: »
    tross0924 wrote: »
    vinceno21 wrote: »
    psuLemon wrote: »
    I don't test my 1RM for another 3 weeks, but here is what I currently do for 6 reps, at 3 sets; and for fun, I did a 1RM calculator). I am 178lbs.

    DL/Squat - 235lbs (Est 1RM 275)
    Bench - 155lb (Est 1RM 185)

    Following: Bigger Leaner Stronger. I am in week 5. With very little/inconsistent heavy lifting prior. I did 4 weeks of 5/3/1 until lift got in the way.

    Not to burst your bubble but the strength calculator is not that accurate and you cant base your 1rm off of that. You should get your numbers way up before you start offering your coaching on peoples routines.

    Bench - 325lb
    Squat - 425
    DL - 455

    Squat - 525
    Deads - 600
    Bench - 375

    Dude, you should get your numbers way up before you throw shade at other people for their numbers.

    Listen, I never threw the guy shade for his numbers ok? I'm not one to say oh you're weak so don't speak. That type of mentality is such a waste. I was telling him that if you're a beginner you shouldn't jump straight into powerlifting routines if you don't even have the basics down. Also, it seems like you are a bit hypocritical by sying dont throw someone shade about their numbers then say I should get mine up. Great job you're strong and you also have been lifting for 10 more years than I have lol.

    Wow! You really do assume a lot of things! And you don't even see them as assumptions.

    How long has psuLemon been lifting?
    How did he get injured? (I laughed at this one cause you said "I didn't assume anything I just took information that wasn't there and fit it in with what we were talking about and acted like that was fact.")
    How much experience does he have?
    How long have I been lifting? (Hint it's not 10 years total let alone 10 years longer than you, and yes I'm assuming you've lifted at least one day)
    How's my form? (Have you seen me squat or are you assuming that because I can move a lot of weight I must know what I'm talking about)

    Also it seems like your sarcasm detector is broken . . .

    Basically you were being hypocritical telling me not to give someone a hard time about their numbers but you did the exact same thing to me. You're like 14 years older than me and have easily been working out a lot longer than I have lol. I really don't care but you're missing the point completely. This all started by me telling a beginner to not worry about moving heavy weight and to practice his technique. No need for your petty comments. Also, yea I would definitely assume and hope you have great form with numbers like that. Would you say I'm wrong about that and that you have no clue about what you're doing? And for the record I just got into power lifting like a year and a half ago so my numbers will be going way past where they currently are now. I started off bodybuilding for a few years and decided to bulk up and power lift a lot more frequently. Just because someone is a moderator doesn't mean you need to cook up some random comment that's not relevant at all to the discussion. I have nothing against psulemon and appreciate his opinion and this discussion.

    So we can get back on track, let me say one last things and we can let this drop. When I made that suggested to that person, it wasn't a means to modify their programming because before you go down that road you need to understand all the variables. I made the comment because you can't adequately compare ones weight x 10/15 reps vs most people's 1RM or 3RM. I was simple stating, that if they wanted a comparable number, that they should go to the gym (pending they have good form) and try a 1RM or 3RM. That is what I did 5 weeks ago when I started the program (of which I have surpassed all my tested 1RMs). This way, if the person didn't want to feel weak or was curious on how they compared, they could make an apples to apples comparison.

    This largely was extremely overblown and way too many assumptions were made. So let's just move on. It's really not worth my time or the time of anyone else.

    I agree and apologize for the misunderstanding sir. I never intended to have like 10 people try to battle me in this discussion haha.
  • MrHillman22
    MrHillman22 Posts: 401 Member
    Quick update

    As of this week my PR's are now:
    175kg squat (385lbs)
    130kg bench press (2 reps) .. 286lbs
    220kg deadlift (484lbs)
  • AgentFlex
    AgentFlex Posts: 211 Member
    Current 1RM's at 164 pound bodyweight

    Squat: 225 pounds
    Bench: 150 pounds
    Deadlift: 280 pounds

    Throwing in OHP because I love it, 105 pounds.
  • jmule24
    jmule24 Posts: 1,382 Member
    BW: 165

    Squat: 315
    Bench: 205
    Dead: 375

    IMO numbers are just a me vs. me thing.....I applaud all those who want self betterment.

    @nakedraygun might get me to do a PL meet this year......we shall see..............
  • AgentFlex
    AgentFlex Posts: 211 Member
    Barbonica wrote: »
    BW: 161
    Age 55 ( i know, you didn't ask)

    Squat: 185
    Bench: 120
    DL: 300

    Goal for meet April 2: DL 320

    I agree bench is stupid, but some day I too will bench using the big-girl plates.

    You are amazing! I was stuck at 120 on bench for a solid year, managed to add 30 pounds to my bench this year doing 531.
This discussion has been closed.